HEXIN GLASS door is made by heating flat glass to just below its softening temperature  (650 °c) and suddenly chilling it with jets of cold air. It results in the outer skins under powerful compressive stress and the interior with severe tensile stress. In consequence, the impact applied to the glass will be overcome by the compressive stress on the surfaces to assure safety of use. It is ideal for areas with high wind loads and areas where human contacts are an important consideration.

-

FEATURES:

1. 5 times harder than ordinary float glass, stronger resistance to thermal breakage than annealed or heat strengthened glass.

2. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.

3. It withstands abrupt temperature change of 220 Centigrade.

4. Sizes are produced as per customer request. Once tempered, it can not be cut down.

QUALITY STANDARD

In accordance with CE EN12150 standard.

In accordance with BS6206 British Standard

In accordance with AS/NZS 2208:1996 safety glazing standard

In accordance with ANSI Z97.1 CPSC 16 CFR 1201 Standard

In accordance with GB 9963-1998 Clear tempered glass Standard.

In accordance with GB 17981-1999 Chinese Standard Tempered and Heat-Strengthened Glass Used in Curtain Walls.

Pass Chinese Safety Glass Compulsory Certification (CCC).