Main structural forms:

The sf-csms security monitoring and management system is divided into six parts: the power supply part, the information acquisition part, the information recording and processing part, the information display part, the input and output part and the video system. The power supply part is controlled by the crane with the power supply from the UPS. The protection system can run for a period of time after the accident power failure of the crane, so as to store the corresponding data in time. Information acquisition part on the single chip microcomputer serial port communication up and down through the bus is connected to the car, cart communication box, input and output control module, anemometer, communication up and down the car tank connection with height and displacement respectively, encoder, lifting weight sensors, cart communication connection box cart displacement sensor, the infrared collision sensors, information records, data processing, information display are done by single chip microcomputer, through the operation, can realize real-time data and status display, view the history data, fault information view, operation instruction information view, derived via USB data to the U disk, etc. Data storage can satisfy the requirement of the 30 working days record, including cameras and video system to monitor job status lifting point operational areas, using the large capacity hard disk video system for storage, can meet the requirements of the record of 72 hours of video storage.