808nm diode lazer cutting  break melanin perpetual in motion quick freezing depilate machine

 

Innovative diode laser products, overthrow traditional laser therapy hair removal technology, realize your dream of virtual painless hair removal. 810nm / 808nm Diode laser is the gold standard for hair removal. Light at the wavelength of 810nm / 808nm is absorbed by melanin and at the same time, greatly reduce the absorption by water and haematoglobin. Treatment is safe for epidermis.

 

Maximum frequency of 20HZ 810nm / 808nm uniform diode laser beam penetrate through epidermis into dermis and absorbed by melanin in hair and hair follicle, producing photo thermal effect, conducting the energy from hair section to hair root, rising temperature of melanin and decomposing it. Thus reaching effect of hair removal.

 

Working Theory

Diode laser hair removal technology is based on  the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.

Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.

The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.

When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.

 

What is “jet smooth”?

“Jet smooth” adopts 810nm / 808nm diode laser, uniform energy constantly penetrates deep into dermis and heat hair follicle with maximum 10 pulses in one seconds. Instead of destroying follicle in a short time, SHR mode is specially designed to heat hair follicles to proper damage point gradually with low frequency to assure the virtual painless and fast treatment.

Touch cooling system

Sapphire touch cooling assure reliable and constant cooling result for skin surface with the maximum comfort and safety. Maximum energy target on follicle with less consumption by tissue. When Dermi ICE start to release energy, Sapphire touch cooling system works Automatically. The temperature of -5°C to 5°C furtherly increase treatment comfort.

 

Advantage  

1. 600/800W power is capable to meet all demands of hair removal on the whole body;
2. 20Hz frequency and 12x18mm spot size ensures faster, smooth and effective treatment;
3. Super sapphire touch directly cooling system ensures painless and comfortable treatment;
4. No consumable and less maintenance expense after purchase
5. With a longer wavelength, almost no laser scattering on epidermis, the treatment is much safer, particularly for darker skin;
6. Micro-channel cooling technology of semi-conductor array ensures steady emitting when the frequency is 20Hz;
7. Plug & play handle enables easy transport and lower the maintenance cost;
8. Treatments are virtually painless;
9. 24 hours continues work;
10. More than 20,000,000 flash for longer laser generator’s lifetime flashes

  

Super cooling system

A. Water cooling,

B. air cooling,

C. semi-conductor cooling

D. compressor refrigeration cooling. ( Only in our company )

E. TEC Cooling. ( Only in our company )

F. Automotive cooling blanket. ( Only in our company )

 

Specifications

Input Power	3000W
Laser type	Diode Laser
Wavelength	808nm/810nm
Laser Output Power	800W
Pulse Width	5-400ms
Energy Density	1-120J/CM2
Spot Size	12*18mm
Repetition Frequency	1-20HZ
Cooling	Sapphire Touch Cooling:-5°C to 5°C
Display	8.4 inch TFT Chromatic Screen
Voltage	AC 100V/220V, 60Hz/50Hz
Cooling	Water Cooling Air Cooling Semi-conductor Cooling.(Only in our company) TEC Cooling.(Only in our company) Automotive Cooling Blanket.(Only in our company)

 

 Before&After