The AirSteril Induct UV Air Purifier is a new generation HVAC air system
designed to mount on any existing air ducts (or furnace plenum above the
coils/blower) and safely sanitizes air as it recirculated through the
ventilation system. It irradiates the cold or hot moving air and the internal
duct walls, safely and destroys living airborne and surface pathogens such as
viruses,mold spores,bacteria,VOC,odor,biofilm,allergens and more by using
powerful high output UVC temperature independent shatter-proof lamp cells.


BENEFITS:

* Improves Indoor Air Quality: Help eliminate contaminants like mold and
bacteria, reducing exposure to potentially harmful airborne contaminants.
* Mold & Dust Free: Keep AHU cooling coils,blower,drain pans clean and
internal duct walls dust free.
* Reduces airborne dust and particles: In
residential and commercial areas
* Food Industry: To enhance food safety through mold and bacteria control,
extending product shelf life and production yields.
* Reduces Maintenance: Eliminates the hassle and costs of HVAC chemical
cleaning.
* Cost Effective: Clean coils means HVAC runs more efficiently, saving
energy and money.
* Safe: Produces no ozone or secondary contaminants.
* Quality: UL parts ,CE listings


FEATURES:

1) High UVC output in cold air stream 50F(10C) : 11.5 microwatts per linear
inch of glass measured from 1 meter at an air speed of 400 feet per
minute
2) Lamp cell does not suffer from the cold environments,UVC output will not
drop in room temperature air flow or low temperature air flow from cooling
coils
3) Shatter proof lamp coating,excellent for use in hospital,food
factory,school...etc
4) Snap on Ti02 Photocatalyst PCO for odor and VOC
5) Dust and moisture free on lamp surface
6) User friendly lamp cell retention system by 2 x thumb clamping screws
7) Reinforced structure on lamp tubes and lamp base for high wind load condition
8) Very easy and quick lamp cell maintenance and replacement,no screw driver
required - simply remove the cover base by releasing the two thumb nuts
and pull out old lamp cells,insert new ones
9) Large 20mm dia.viewport for easy and safe direct monitoring of lamp cells
operation from height and distance
10)Durable Construction, heavy duty extruded aluminum housing with silver
anodized and sand blasted.
All stainless steel screws
Polycarbonate holding plate/switch box that is UL94-VO fire rated and UV
stabilized


SPECIFICATION:

Aluminum housing Dimensions:
AST2000 280mm L x 156mm W x 65mm H
AST3000 420mm L x 156mm W x 65mm H (280mm 11" lamps centerlines)

Power consumption: AST2000 36w
AST3000 72w

Weight: AST2000 1.5Kgs
AST3000 2.5Kgs

Lamp life: 9000 hours continuous operation

silicon seal gasket ring
2.5 meter detachable power cord
On/Off switch & fuse
Mounting hole: 3 inches

Template provided
Pilot hole drill bit provided
6x self-drilling mounting screws provided
Anchors for fiber ducts(Optional)





ELECTRICAL:

120V-277V, 50/60Hz
UL/CE Certified Electronic Ballast microprocessor controlled and 100%
electronic
Meets Canadian & USA & European Standards for electrical safety.
EOL circuity safely removes power from UV lamps as they near end of life