Shell Tellus Oil Shell Tellus Oil (viscosity grade: ISO 22,32,37,46,68,100) Shell Tellus Oil is a high-quality hydraulic oil composed of solvent-refined high-viscosity mineral oil and selected additives.Tellus tonic industry is known as the "standard" of hydraulic rolling oil.Recommended Applications: Industrial Hydraulic System Mobile Equipment Hydraulic System Marine Hydraulic System Performance Features and Benefits: Thermal stability, Tellus hydraulic oil has strong resistance to deterioration and sludge formation, greatly improving the reliability and cleanliness of the system .·Anti-oxidation, in the presence of air, water and copper, it can still maintain excellent oxidation resistance.The Turbine Oil Oxidation Stability Test (TOST) results show Tellus has excellent oxidation resistance, low acidity, low sludge content and low sludge formation.Therefore, the use of Tellus can prolong the oil change period and reduce maintenance costs.·Hydrolytic stability, Tellus has excellent chemical stability in humid environment, ensuring long service life and avoiding the occurrence of corrosion and rust.· Outstanding anti-wear properties, high-quality anti-wear additives play a reliable role in various operating conditions throughout the life of the oil, including low load and extreme load conditions.Outstanding anti-wear properties are proven in a variety of piston and vane pump tests, including the harsh Denison T6 (dry and wet) and the rigorous Vickers 35VQ25 test.·Excellent filtration performance, Tellus hydraulic oil is suitable for ultra-fine filter and will not be affected by pollutants such as water and calcium, which are the main reasons for ultra-fine filter blockage.Users can use finer filters, which means cleaner hydraulic fluid for longer equipment life.Shell Tellus Oil Shell Tellus Oil (viscosity grade: ISO 22,32,37,46,68,100) Low friction, Tellus has high lubricating performance and extremely low friction, no matter the hydraulic system runs at high or low speed.It can also avoid stick-slip always occur in harsh working conditions, and realize more precise mechanical control.Excellent air release and anti-foaming properties, carefully selected additives ensure rapid air release without excessive foaming.The fast air release capability greatly reduces cavitation corrosion and oxidation, keeping the system and hydraulic fluid working reliably.· Strong water separation, avoiding the formation of water-in-oil flotation, thus protecting the system and pump from damage.Tellus hydraulic fluids are approved and certified as follows: CINCINNATI p-68(ISO 32) CINCINNATI p-70(ISO 46) CINCINNATI p-69(ISO 68) DENISON HF-0 DENISON HF-1 DENISON HF-2 Eaton(Vickers) M-2950 S Eaton(Vickers)1-286 S Mannesman Rexroth RE 90 220-1 Tellus hydraulic oil meets the following standard requirements: DIN 51524 PART 2 ISO 11158 GMLS/2 AFNOR NF-E 48-603 Swedish Standard SS 15 54 34 AM Shell Tellus Oil (Viscosity Grade: ISO 22,32,37,46,68,100) Typical Data Shell Tellus Oil 22 32 37 46 68 100 ISO Type HM HM HM HM HM HM Kinematic Viscosity @40℃mm2/s 100℃mm2/s 22 4.3 32 5.4 37 5.9 46 6.7 68 8.6 100 11.1 Viscosity Index 100 99 99 98 97 96 Density @15℃kg/l 0.866 0.875 0.875 0.8179 0.89 (open cup) ℃ 204 209 212 218 223 234 Pour Point ℃ -30 -30 -30 -30 -24 -24 Product Name: Shell Wanan EDM Spark Erosion Fluid Product Category: Shell Lubricating Oil - Shell Spark Oil Product Model: Shell Macron EDM Fluids Product description: Shell Macron EDM EDM Fluid It is an insulating working fluid for spark erosion metal processing.Recommended Applications Shell EDM Erosion Erosion Fluid is a working fluid for Erosion Erosion Metalworking.Performance characteristics Shell Wanan EDM spark erosion fluid has high boiling point, which can minimize volatilization loss; low viscosity, excellent cleaning effect on spark plugs; high flash point, reduce the risk of fire in the machine; Shell Wanan EDM Erosion Erosion Fluid is made of base oil that has undergone a unique refining process and deep processing. It has good thermal stability and oxidation stability, and has a long working life; Improve the working environment; The content of aromatic hydrocarbons is extremely low, which is harmless to the human body; Good filterability, quickly removes fines generated during processing.Typical data Shell Wanan EDM Spark Erosion Fluid 110 130 Density 15℃ 0.801 0.822 Viscosity 40℃ 2.4 3.7 Flash Point 105 (closed cup) 120 (open cup) Product Category: Shell Lubricant - Shell Spark Oil Product Name: Shell Wanan EDM Spark Erosion Fluid Product Model: Shell Macron EDM Fluids GW/NW: 15KG/170KG MOQ: 1 Product Introduction: Shell Macron EDM Spark Erosion Fluid Mobil (spark oil) Weimei EDM Mobil Spark Oil Weimei EDM-Xtra, EDM (Mobil Vacmul EDM-Xtra, EDM3) Mobil Vacmul EDM-Xtra is the third generation of special effect spark oil with advanced and unique formula. It not only has high-strength dielectric properties and low electrical conductivity, but also has extremely high chemical stability. Well, the best performing insulating fluid EDM oil.Mobil Valmet EDM 3 Spark Oil is a multipurpose spark oil suitable for use on all EDM machines.Its highly refined base oils meet the latest requirements of equipment manufacturers in terms of processing speed and safety.Product Name Density (15℃) kg/L Flash Point ℃ Viscosity (40℃) Centistoke Distillation Boiling Point ℃ (Initial) Copper Corrosion

Mobil (cylinder oil) 600w series Mobil Cylinder Oils (Mobil Cylinder Oils) Mobil cylinder oil is a high-viscosity lubricating oil specially configured for steam cylinders, sealed worm gears, bearings and connectors.Has good heat resistance.Resists water vapor washout in steam cylinders.Mobil 600W Cylinder Oil (Mobil 600W Cylinder Oil) is suitable for steam cylinders.Also suitable for worm gears operating at normal to high speeds and high temperatures.Mobil 600W Super Cylinder oil and Mobil Extra Hecla Super Cylinder oil have higher viscosity.Can be used for higher temperature and load.Mobil 600W Super Cylinder Oil Mineral is suitable for steam cylinders below 288°C.Its oil-water separation performance is excellent.Product Name Specific Gravity Pour Point °C Flash Point °C Viscosity (40 °C) Centistoke Viscosity (100 °C) Centistoke Viscosity Index ISO Viscosity Grade Mobil 600W Cylinder Oil 0.910 -3 294 414 29 95 - Mobil 600W Super Cylinder Oil 0.910 -3 316 484 31.8 95 460 Mobil Premium Cylinder Oil 0.910 -3 316 726 40.7 95 680 Mobil 600W Mineral Super Cylinder Oil 0.910 -3 316 587 34.8 90 -

Mobil 1130, 1140 and 1150 are all heavy-duty, single-grade diesel engine oils formulated with the best base oil and balanced additive formula. Features and advantages have good rust and corrosion resistance. Longer equipment life and operation Cost Reduction Good Thermal and Oxidative Stability Control Sludge Formation and Coking Application Range Diesel and Gasoline Engines Required to Meet API CD/SF Performance Standards On-Highway Light and Medium Duty Trucks Off-Highway Applications such as Construction, Mining, Mobil Delvac 1330, 1340 and 1350 for quarrying and agriculture, etc Oil These specially formulated lubricants are designed for use in intercooled turbocharged engines operating in severe on- and off-highway applications.Mobil 1330, 1340 and 1350 Single Grade Diesel Engine Oils can be used in a wide range of installations where single grade diesel engine oils are recommended.Features and Benefits The advantages of Mobil series single-grade lubricants are as follows: Applications Naturally aspirated and turbocharged diesel engines On-road light and heavy-duty trucks Off-highway applications such as construction, mining, quarrying and agriculture Typical properties of Mobil Willy 1330, 1340 and 1350 Features and Advantages The advantages of Mobil series single-grade lubricants are as follows: Features Advantages and potential advantages Excellent prevention of oil thickening, high temperature carbon deposition, sludge deposition, oil degradation and corrosion protection, etc. Protective properties extend engine life Less wear Excellent performance to prevent piston ring sticking Strong total alkali reserve capacity Long-term control of sediment formation, control of wear and tear Control of acid production when using high-sulfur fuels and 1350 Typical Properties Mobil 1330 1340 1350 SAE Viscosity Grades 30 40 50 Viscosity, ASTM D 445 cSt @ 40oC 106 146 231 cSt @ 100oC 11.8 14.6 19.9 Viscosity Index, ASTM D 2270 99 99 99 Sulfated Ash, wt%, ASTM D 874 1.1 1.1 1.1 Total Base Number, mg KOH/g ASTM D 2896 10.1 10.1 10.1 Pour Point, oC, ASTM D 97 -21 -21 -18 Flash Point, oC, ASTM D 92 256 254 260 Density @ 15oC kg/l, ASTM D 4052 0.89 0.90 0.90