Structure of transformer core straight cutting machine:

This machine cut the transformer core lamination in right angle, In the PLC screen, the width, length, cut quantity punching dies, cutting speed etc. can be pre-set.
1 Inverter-controlled decoiler 
2 Automatic center positioning & guiding devices 

3. Cutting Device
4 Online hole punching device
5 Control system PLC

6.Belt transmitting table

7.Stacking table

Cutting length:10mm-5000mm

Shearing thickness:0.8-4.0mm

The shearing precision:+-0.2mm

The shearing angle:Max0.025 degrees

Cutting burr height:Max0.02mm

Punching burr height:Max0.03mm

shear speed:5-50 pieces per minute

Characteristics

1.Tailoring:using hydraulic power technology,namely the shear stress,fast speed,low noise,long life.

2.Leveling:the use of high torque AC synchronous servo motor driven 11 roller leveling device,

leveling and shearing integration.

3.Feeding:the use of high torque AC synchronous servo motor,has the advantage of fast response,high

positioning accuracy,low noise,small thermal braking,long life.

4.Motion control:the advanced PLC controller,touch screen operation,simple and convenient.

5.Life assurance:This equipment standard(linear guide,ball screw,all kinds of bearings)are imported high-quality parts,basic parts processing and assembly of high precision,the maximum extension of the service life of the equipment.

Cangzhou Kenuo international co.,ltd. Whatsapp:0086-18931789005