Key Features

1. Open WRT for second development
2. 4G/3G/PPPoE/DHCP and Static address connection mode, switchover between wired and wireless connectivity, with rich working modes to choose
3. APN/VPDN to ensure the security of data transmission
4. Multiple VPN protocols, IPSec, L2TP, PPTP and OPEN VPN
5. DHCP server, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, Traffic Analysis, Real-time display of data transfer rate, etc.
5. TCP/IP, UDP, FTP, HTTP network protocols
6. SPI Firewall, DoS attack, VPN traversal, Access Control, Port Mapping, DMZ Mapping, Access Control List(ACL), IP-MAC binding and Clone function, etc.
7. Heartbeat link detection, offline automatic reconnection
8. Hardware and software auto inspection technology, enable operation fault auto repairing
9. Status query of system, network connection, routing
10. Telnet, web, ssh configurations
11. Web upgrade, local system log, remote log, serial port output log.

System     CPU and Memory CPU Industrial 32-bit FLASH 16MB(Extendable to 64MB) SDRAM 128MB(Extendable to 256MB) Interface   Power Requirements Standard Power DC 12V/1.5A Power Range DC 5~35V Built-in power inverting protection and over voltage protection Serial Port RS232, or RS485(or RS422) Industrial terminal block, suitable for industrial applications Built-in 15KV ESD protection, and TTL GPIOs is customizable Serial Port Rate 300~230400bits/s Data Bit 5, 6, 7, 8 bits Stop Bit 1, 1.5, 2 bits Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check Ethernet Port WAN 1x10/100M WAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection LAN 4x10/100M LAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection WIFI Standard IEEE802.11b/g/n for wireless LAN Transmission Rates IEEE802.11b/g: Up to 54Mbps IEEE802.11n: Up to 300Mbps Security WEP, WPA/WPA2 TX Transmit Power 21.5dBm(11g), 26dBm(11b) RX Sensitivity <-72dBm@54Mpbs Others Indicators LAN, WAN, WIFI, Alarm, Online, System, Signal Strength, Power Antenna Interface Standard SMA female antenna interface, characteristic impedance 50Ω SIM/UIM Card Holder Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection   Power Requirements Standard Power DC 12V/1.5A Power Range DC 5~35V Built-in power inverting protection and over voltage protection Serial Port RS232, or RS485(or RS422) Industrial terminal block, suitable for industrial applications Built-in 15KV ESD protection, and TTL GPIOs is customizable Serial Port Rate 300~230400bits/s Data Bit 5, 6, 7, 8 bits Stop Bit 1, 1.5, 2 bits Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check Ethernet Port WAN 1x10/100M WAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection LAN 4x10/100M LAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection WIFI Standard IEEE802.11b/g/n for wireless LAN Transmission Rates IEEE802.11b/g: Up to 54Mbps IEEE802.11n: Up to 300Mbps Security WEP, WPA/WPA2 TX Transmit Power 21.5dBm(11g), 26dBm(11b) RX Sensitivity <-72dBm@54Mpbs Others Indicators LAN, WAN, WIFI, Alarm, Online, System, Signal Strength, Power Antenna Interface Standard SMA female antenna interface, characteristic impedance 50Ω SIM/UIM Card Holder Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

System Architecture