Product No: VMC300

Product Name: Small 5 Axis CNC Machine Center

Mills CNC introduces a new, compact simultaneous 5-axis machining centre into the market.

features:

1. Using 220 volt voltage, small footprint, low power consumption, passing the EU CE safety certification, using high-precision linear guide rails, high-quality cast iron material casting, and high-precision grinding ball screw; Equipped with 5-axis 5-linkage industrial-grade CNC system; Main processing materials: steel, iron, copper, aluminum alloy, etc.;
2. High-strength resin sand castings, with increased function, 5-axis linkage, equipped with YORNEW M5 five-axis linkage CNC system, supporting RTCP tip following function, applicable to international general programs, automatic fault detection and alarm function, power-off memory function;
3. Equipped with a precision high-speed spindle of 100-24000rpm, frequency conversion G command to control the spindle speed, spindle motor power of 1.5Kw;
4. Equipped with 10-station fast tool change system, the fastest tool change time is 4S, and the air pressure is 0.6 Mpa, which can greatly improve the processing efficiency and machining accuracy of complex products;
5. C3 grade precision double-nut ball screw is adopted, after medium and frequency heat treatment and precision grinding, each shaft is pre-tensioned to reduce thermal deformation, and the positioning and repeat accuracy is high;
6. The XYZAC axis adopts servo motor, and the fastest moving speed is 10000mm/min;
7. The machine adopts Renishaw laser interferometer for accurate detection to ensure the accuracy of each axis backlash and ensure the positioning accuracy;
8. With industrial cold cooling system, equipped with 5-axis electronic hand pulse with three adjustable levels, which greatly facilitates operation and tool setting, and the machine is equipped with an automatic intermittent lubrication system;
9. It is equipped with mobile casters and horizontal foot pads to facilitate the movement and positioning of the equipment;

Suitable Industries:
■ University scientific research units: processing of first boards, samples, and small batches of products;
■ Maker Innovation Laboratory: processing of functional parts and shells of creative products, processing of first plates, and five-axis processing of various models;
■ Vocational education: training in programming and processing of five-axis CNC machine tools;