The low-concentration slag separator is the principle of centrifugal separation of eddy current, and the slurry of pressure is entered from the inlet of the inlet of the tangential direction, and the vortex motion of high speed is made in the conical separation. The vortex in the axial direction of the separation tube is led to the end of the cone, and the heavy impurities in the slurry are thrown into the wall of the wall and discharged from the lower end. The slurry gathers to the center of the separation tube and forms the main slurry flow, which is sent out from the upper part of the slurry to the next process.

Technical data of slag eliminator

Single pass amount: 400L/min

Concentration: 0.30~1.0%

Inlet pressure: 0.25~0.35Mpa

Rated entry and exit pressure differential: 0.15mpa

Minimum good pulp pressure: 0.03Mpa