Led MatrixPanel 3x3

Led 3x3 matrix panel is a LED matrix module capable of projecting volumetric graphics, simulating a 3D effect. 

 

Description:

1.The cutting-edge optic design combines warm white 2800K° LED source with special optic reflectors which allow a unique reproduction of 4° tight light beams.

2.The generated effect is a wall of LEDs, performing a long through projection of sharp beams in the air which are brighter than conventional LED screens. 3.Led pixel art madrix is a matrix composed by 3x3 high efficiency CREE LEDs with dimensions of 250x250x115 mm and on-board modular rigging system to build wall or matrix in every sizes.

4.The innovative electric design and the quality of components and drivers applied offer a stepless and linear dimmer, useful to perform same dimming curve of halogen fixtures, allowing its fitness for theatrical application or wherever is required high performance dimming capabilities.

5.Led pixel art madrix is an ideal tool for rental companies: superslim design, lightweight, user friendly, power supply and control electronics are on board and it doesn't need any external driver.

6.The user interface comes through a graphic LCD display for user settings, diagnostic and addressing through DMX, Art-Net or Kling-Net protocols.

 

Light Source：

1. Led Model:9pcs Led high out-put Cree 3W led

2. Life Spain:Over 50000 Hours

3. Color:Warm White

 

Optics:

1. Dimmer:Linear Dimming 0%-100%

2. Strobe:0-10 Per/Sec

3. Beam Angle:4°

 

Features:

1. LCD Display control panel

2. Several DMX selectable configurations (7/9 channels) for pixel to pixel or basic controlling: DMX, Art-Net and Kling-Net control protocol supported

3. Auto mode: built-in programs with execution speed adjustment

4. Master/Slave mode: for synchronized operation of more units linked in a chain

5. Linear and “stepless” transition between DMX values

6. Flicker free operations (400Hz)

 

Structure and Power Supplier:

1. Sturdy die-cast aluminum

2. Internal Protection: IP20

3. Natural air convection

4. Bracket for truss rigging and hardware for connection of more units

5. Power unit: 100-240V 50/60Hz

6. IN/OUT power wiring and signal through connections XLR3p/Powercon

7. Power consumption: 35W (power output up to 9 fixtures)

8. Weight: 5.5 kg

9. Dimensions (WxHxD):250x250x115mm