Competitive DN15 Plastic Mechanical Heat Meters with M-bus


The main features of the DN15 plastic mechanical heat meters are the
plastic body of the mechanical heat meters. We make the mechanical heat meters
with plastics body for main two reasons: one is that the body of the plastics
are very strong, but at the same time, it can save a lot of costs for the
users. The second is that our mechanical heat meters with plastics body meet
the NSF requirements and it is very good quality plastic body, it can pass
the NSF testing and take the place of brass body in some North American
countries.


 The mechanical heat meter with plastic body is
mainly used for measuring the heat exchange system releasing and absorbing the
heat with the carrier of water, besides, for heat supply or cooling heat
system.


The specification of Competitive DN15 Plastic Mechanical Heat Meters with M-bus:


Diameter DN (MM):              DN15      DN20     DN25


qi(m3/h):                         0.03       0.05      0.07


qp(m3/h)                         1.5        2.5       3.5


  qs(m3/h)                           3           5          7


  Function                      M-BUS, RS485, Pulse, infrared


 Accuracy class                              3


Pressure loss                           25kPa


Max working pressure               1.6MPa


Temperature range                   4 ~ 95


Temperature difference range    3 ~ 70


Temperature differential                0.01


Environmental grade                         A


Batteryworking time                    8years


Installation way                         horizontal

Temperature sensor                   PT1000

Display digits                               8digits






http://www.meter-technology.com