High Quality Car Fog Light 9005 9006 HB3 HB4 H7 H8 H11 H4 H13 LED Decoder Harness Single Resistance Decode Line 50W 6ohm

Does your HID or LED kit lights flicker / flash / or do not stay on? Chances are your vehicle has a CANBUS system which monitors the light bulb sockets and thinks your bulbs are out. HID and LED do not put the same load on the vehicle as regular halogen bulbs. This is your solution to the problem!

2 pieces (a pair) of 9005 9006 HB3 HB4 H7 H8 H11 H4 H13 Type Error Fixer / Warning Canceller / Bulb out solution

Type of function: Ensure no error when installing LED Light or Xenon HID Conversion kit for Headlight, Fog Light or Daytime Running Light with 9005 9006 HB3 HB4 H7 H8 H11 H4 H13 Type plug (ANY HID OR LED KIT)

Plugs between the car wiring and the wiring provided with your kit. Example: If your kit is a H7 kit, it will plug to the vehicle, and the other end will plug to the wiring connector that came with the H7 HID or LED kit.

High beam and low beam error bypass load resistors

Overall harness length: 25cm / 9.8inch

Product weight: 170g / 5.9oz

Please Note: The gold resistors gets HOT while stabailzing your headlight voltage. The resistors must be mounted to metal, or let hanging with nothing touching it.

Do not mount on plastics because it will melt or touch with your finger when on.

More Features:

It works as warning canceller, decoder, capacitor, or blinker rapid Flash Equalizer to ensure no error message for LED Light or Xenon HID Lighting to install on Headlight (high or low beam) /9005 9006 HB3 HB4 H7 H8 H11 H4 H13 housing adapter socket

It will overcome the problem of OBC Warning Error code, excessive flashing or bulb rejection; since standard LED light and Xenon HID light may not work properly on European and latest Japanese vehicles with OBC CAN Bus wiring system

9005 9006 HB3 HB4 H7 H8 H11 H4 H13 Lamp bulb connector / socket that works with all single beam HID kits

Male and Female connector included

Easy pre-wired, Plug & Play installation. No cutting.

Equips with 50W 6 Ohm Load Resistor

Rated ~10V-15V