FT14 ball float steam trap (Threaded)

Model:	FT14
Brand:	GOOLE
Origin:	Made In China
Category:	Industrial Supplies / Machine Hardware / Valves
Label:	china steam trap , thread steam trap , steel steam trap
Price:	¥1 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Brief Introduction.

FT14 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water,

Structural characteristic :
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.

Field of Application.

Pressure Rating: 1.6- 4.0 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: Steel WCB,Stainless Steel.
Standard flanges: DIN, ANSI, JIS.
Standard Screwed:NPT,BSP.

Main Technical Parameters and Indexes of Performance.

Nominal pressure	PN16
Maximun design pressure(PMA)	16bar g @ 120
Maximun design temperature(TMA)	250 @ 13bar g
Minimun design temperature(TMI)	-10
Maximun upstream pressure for saturated steam service(PMO)	14bar g
Maximun operating temperature(TMO)	250 @ 13bar g
Minimun operating temperature(TMIO)	0
Maximun differential pressure( PMX )	FT14-4.5 4.5bar
	FT14 -10 10bar
	FT14 -14 14bar
Maximum cold hydraulic test pressure	24bar g