Introduction

Francis turbine is suitable for middle and high water head, from 15 meter to 300 meters. The merits of this turbine include good operation stability, impacted structure, and relatively higher average efficiency.Vertical and horizontal shaft arrangements are both available. It is one of the most widely used turbines.

Specifications:

The diameter of the runner is 0.42m- 5.0m;
Suitable water head: H =8m- 140m;
Suitable flow: Q =0.20m3/s- 20.0m3/s;
Capacity of the generator unit: 50kw -50000kw.
(given water resource data, more other models are available)

Before making quotation, please send us the following basic parameters:

1. Water Head (m)

2. Total Discharge (m3/s)

3. Unit Discharge (m3/s)

4. Number of Units (set)

5. Generator Voltage (V)

6. Generator Frequency (Hz)

7. Grid Voltage (V)

8. Total installation capacity (KW)