Mciro dc pump DC50C

Mciro dc pump DC50C

Date:2015/06/01 Views:853

 

DC50C Series

Product Appearance

Specifications

NO.	Item	Specs
1	Dimension and weight	106mmx97.5mmx71.5mm;480g
2	External diameter of outlet	1/2” thread(M20)
3	External diameter of inlet	1/2” thread(M20)
4	Driving mechanism	Brush-less, magnetic isolated design
5	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6	Condition of use	Can continuously work, submersible or land use (not self-priming)
7	Suitable medium	Water, oil, or normal acid/ alkaline liquids (Pre-test needed for special liquid)
8	Max working temperature	60℃(for T sub-series) or 100℃(for S/A sub-series)
9	Power consumption	2.5W~48W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10	Rated voltage	12Vdc or 24Vdc
11	Working voltage range	5Vdc ~ 14Vdc or 5Vdc ~ 26Vdc
12	Max load current	2.0A (for T sub-series) or 4.5A(for S/A sub-series)
13	Max horizontal flow rate	32L/MIN(for T sub-series) or 40L/MIN(for S/A sub-series)
14	Max static lift	4M(for T sub-series) or 8M(for S/A sub-series)
15	Noise class	<40dB
16	Waterproof class	IP68(suitable for submersible installation)
17	Life span	>30,000hrsIP68(suitable for submersible installation)
18	Power supply	Suitable solar panel, batteries, adapter or other power source
19	Protection function	Dry-run protection, lock protection(customized function)
20	Power regulation function	Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
22	Feature	small size with high efficiency,maintenance-free Use ceramics shaft and carbon fiber sleeve Completely water proof (IP68) Brush-less dc control without pollution, long life span OEM and ODM service accept Offer Pump related control system design

 

Pump Structure

Electrical parameters (only for reference，parameters can be customized for specific requirements)

​​

Model No.	Voltage	Max load current	Max static lift	Max flow rate	Power consumption
	V(dc)	A	M	L/H	w
DC50C-1230T	12	2.0	3.0	1680	24
DC50C-1230S
DC50C-1230A
DC50C-1260S	12	4.5	6.0	2100	54
DC50C-1260A
DC50C-2440T	24	2.0	4.0	1920	48
DC50C-2440S
DC50C-2440A
DC50C-2480S	24	3.60	8.0	2400	86.4
DC50C-2480A
NOTE	Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.  When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).  The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head.  The max flow rate means flow rate with no lifting height(according to the curve bellow)

 

Difference between 2phase & 3phase brushless DC pump

2phase  (T sub-series)

Hall sensor driving, circuit board should be placed inside pump body

3phase (S/A sub-series)

NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply  the same with common DC pump Intelligent program-driving, sensor-less, circuit outside of pump body (main factor that pump can be high-temperature resistant) Speed adjustable by PWM, 0~5V signal or potentiometer(optional) Lock protection,reverse-connected protection, over-vol.&over-current protection, Soft start, no current impact, can be contact directly with solar panel

 

                   
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.

Flow rate-Head Curve 

Dimensions of pump

​​

production test

 

Exploded diagram of the product 

 Selection guide

 

Model	Voltage (DC)	Current range	Max lift	Max flow	Inlet Dimension	Outlet Dimension	Speed regulation function	Dry-run / Lock protection
DC30A	5~12V	0.1~0.35A	3m	4L/MIN	8mm	8mm	customized	Optional
DC40	6~24V	0.15~1.2A	8m	11L/MIN	14mm	10mm	PWM/0~5V/manual	Optional
DC40A	6~24V	0.15~1.2A	6m	14L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC40C	6~24V	0.15~1.2A	6m	15L/MIN	1/2’’thread	1/2"thread	PWM/0~5V/manual	Optional
DC40D	6~24V	0.15~1.2A	8m	10L/H	10mm	10mm	PWM/0~5V/manual	Optional
DC40F	6~24V	0.15~1.2A	6m	16L/MIN	1/2’’thread	1/2"thread	PWM/0~5V/manual	Optional
DC40H	6~24V	0.15~1.2A	11m	7.5L/MIN	11mm	8mm	PWM/0~5V/manual	Optional
DC50	6~24V	0.15~3.8A	7m	44L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50A	6~24V	0.15~3.8A	5m	60L/MIN	27mm	27mm	PWM/0~5V/manual	Optional
DC50B	6~24V	0.15~3.8A	13m	30L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50C	6~24V	0.15~3.8A	6.5m	42L/MIN	1/2’’thread	1/2"thread	PWM/0~5V/manual	Optional
DC50D	6~24V	0.15~3.8A	6.5m	42L/MIN	20mm	20mm	PWM/0~5V/manual	Optional
DC50E	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’thread	1/2"thread	PWM/0~5V/manual	Optional
DC50F	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’thread	1/2"thread	PWM/0~5V/manual	Optional
DC50G	6~24V	0.15~3.8A	8m	40L/MIN	14mm	8mm	PWM/0~5V/manual	Optional
DC50K	6~24V	0.15~3.8A	16m	23L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC50W	24V	1~3.8A	wave	28000L/H	Submersible	58mm	Variable Frequency	Optional
DC50Q	24V	1~3.8A	5m	5000 L/H	1’’ thread	1"thread	Variable Frequency	Optional
DC60Q	24v	1-5A	5m	10000L/H	1.2’’thread	1.2"thread	Variable Frequency	Optional
Note: 1, lift and flow rate of product can be customized 2, dimension of inlet/outlet, speed adjusting method and control system can be customized. 3,Food grade and mute pump can be customized

Installation

Product Video