Description

 

Settling dust chambers with 3rd calibration certificate is used to check the protection against solid foreign objects to verify the degrees of protection IP5X "Dust-protected" and IP6X "Dust-tight."

 

Manufactured from rectangular steel tubes and sheet steel, with 4 lockable dolly's (wheels), control cabinet with control and monitoring elements located on the right-hand side, voltages and/or frequencies according to customer needs.

 

The Morningtest settling dust chambers provide a ready-made solution to common dust test standards for automotive and electronic-cabinet requirements.

 

These units can be used with talcum powder, and optional reach-in glove ports allow rotating the test sample without opening the door.

 

Model &Working room Size                       

MT-SDC125   (W*D*H) 500*500*500 mm

MT-SDC1000 (W*D*H) 1000*1000*1000mm

 

Performance

Temperature Range：RT

Dust Input:2.0 Kg/m³

Airflow velocity: less than or equal to 2m/s

 

Standard Features:

•Stainless steel interior

•Consists of high pressure circulating fan to meet the environmental requirements of dust and powder

•Control function

Power switch

Switch for Circulation Pump

Timer 1 to control the On/Off condition of the circulation pump

Vibrator switch

Timer 2 to control the On/Off condition of the vibrator

•Circulation Pump Overload

•Door open power off

•50mm cable access port soft plug

•Specimen holder: 1 level (Stainless steel)

•Special circumferential rubber seals for optimum sealing of the test chamber

 

Optional Accessories:

•Acrylic glass door with with a window wiper fitted to the front of the test chamber

•Glove port allow rotating the test sample without opening the door

Please contact Morningtest by sissi(at)morningtest(dot)com for more information and quote.