thickness test instruments digital ultrasonic thickness gauge meter tester 

UM-5DL Color Screen with A/B-Scan Ultrasonic Thickness Gauge Professional in Solving Various Difficult Thickness Measurement

 

Features of UM-5DL Ultrasonic Thckness Gauge              

2.4” color OLED, 320 X 240 pixels, contrast 10,000:1

Live Color A-Scan

Users could directly see the color waveform of the ultrasonic sound (or A-scan) on the screen, which is quite important for the occasions that we need to check the correctness of the testing results. Many cases will cause wrong testing results or even noreadings. We could find the causes easily through the A-scan. Adjust the three parameters of GAIN, BLACKING, GATE, and then we will get the right readings.

Live Color B-Scan 

UM-5 series thickness gauge has time base B-scan function. Move the probe along the workpiece surface, then the cross -sectional profile of the workpiece display, use for observe the underside contour of the workpiece.It could be automatically capture a minimum value of the B-scan image, and indicate the position of the minimum by a red triangle. You can see any point thickness value of the B-scan image by moving the pointer.

Through oating Function No longer need to waste time to remove the coating

We are the first one to develop ultrasonic thickness gauge UM-1D with through coating technology in China. Now UM-5D and UM-5DL also have this widely acclaimed function. It's realized by measuring the two continuous bottom surface of the substrate. This mode also has more advantages:

1. Exempt Zero Calibration
2. High Stability, the measuring value is not influenced by the probe pressure, the coupling layer thickness and the surface dust of the workpiece.
3. Zero Drift 

Larger and More convenient storage capacity

It can save one hundred thousand thickness values and one thousand A/B-scan waveforms,waveform and thickness values can be mixed stored in the same file.Storage capacity is 20-200 times to the similar products.
Use grid format storing files,the screen can display 15 thickness values and show its position in the grid,which is more convenient for the users to browse the stored data of the thickness.
USB 2.0 full speed connector, powerful DataView data statistics and management software.

More Practical Function

Difference/Reduction Rate:Difference mode displays the difference between the actual value and the normal value.Reduction rate calculates and shows the percentage of the thickness reduction when the material becomes thin.Typical application is to measure the metal material which is due to bending and becomes thin.

Max./Min. Capture:On this mode, the current thickness, minimum thickness and the maximum thickness will be shown on the screen at the same time.

Alarm Mode:Dynamic change the color of thickness readings when alarming.

Update Rate:Selectable 4Hz,8hz and 16Hz. 4Hz for ordinary application,when you need a quick scan,such as high temperature measurement, you can choose higher update frequency.

Multi- Languages Available:Chinese,English,Japanese,French,German.

                                                                                              Standard TC510 Probe

The probe is the heart of the instrument,YUSHI has the world’s leading probe production technology. TC510 probe uses the high performance piezoelectric ceramic chip, with integrated metal die-casting shell, practical design of probe and cable separated, regardless of costs to create high quality .

Optional Probes

The Difference Between UM-5 Series Ultrasonic Thickness Gauge

 

	UM-5	UM-5D	UM-5DL
Color Display	√	√	√
Live A-Scan	√	√	√
Time-based B-Scan	√	√	√
Control of Gain and Gate	√	√	√
Blanking	√	√	√
Thru-paint&coatings	×	√	√
Data Logger	×	×	√
DataView Software	×	×	√

Specifications of UM-5DL Ultrasonic Thickness Gauge  

Display Type	2.4'' color OLED, 320×240 pixels, contrast 10,000:1
Operating Principle	Pulse echo with dual elemet transducers
Measuring Range	0.50mm to 508mm(0.02'' to 20.00''), depending on material, probe and surface condition
Measuring Resolution	Selectable 0.01mm, 0.1mm(selectable 0.001'', 0.01'')
Units	Inch or Millimeter
Rectify Mode	RF+, RF-, HALF+, HALF-, FULL
Display Mode	Normal, Minimum/Maximum capture, DIFF/RR%, A-Scan, B-Scan
V-Path Correction	Automatic
Update Rate	Selectable 4Hz, 8Hz, 16Hz
Material Velocity Range	500 to 9999m/s(0.0197 to 0.3939 in/μs)
Languages	English, French, German, etc.
Alarm Settings	Minimum and Maximum alarms. Range of 0.25mm to 508 mm(0.010'' to 20.00''). Dynamic waveform color change on alarm
Power Requirements	2 AA size batteries
Operating Time	Approximately 40 hours
Instrument Shut-off	Selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
Operating Temperature	-10℃ to +50℃(+10°F to +12°F )
Size	153mm × 76mm × 37mm (H × W × D)
Weight	280g including batteries

Standard Delivery of UM-5DL Ultrasonic Thickness Gauge  

♥Kindly Reminder♥: Without Battery and Coupant if By Air Transportation.

Name	Quantity
UM-5DL Ultrasonic Thickness Gauge	1
Probe	1
Battery	1
Couplant	1
Carrying Case	1
Operating Manual	1
USB Cable	1
Software	1

Company Introduction                                      

High Quality NDT Instruments, Choose YUSHI.

Shenyang Yushi Xianfeng Inspection Instrument Co.,Ltd is a professional NDT instrument manufacture located in Shenyang, China. We are established in year 1985 and we have many years experience in NDT instruments manufacture. We mainly produce ultrasonic thickness gauges, leeb hardness testers, coating thickness gauges, Industrial X-ray film viewers, UV lamps, etc.

FAQ                                                       

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept OEM orders?
A: Yes, we provide OEM services to worldwide customers.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for single order is 1-3 days, for bulk orders is 3-10 days.

Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms; 
2. Proforma Invoice made and sent to you; 
3. Complete Payment after confirming the PI; 
4. Confirm Payment and arrange production.

Contact Us