Product Description
The masterbatch used as the slip additives during production of PP film, the additives is in extremely low volatility, The production of the film after proper aging treatment, The friction coefficient of plastic film decline gradually. Has a good slippery properties, optical properties of plastic film, mechanical properties will not be affected. Heat sealing temperature range basically remain unchanged.

Product features
1. Density: 1±0.15 g/cm³
2. Melt index: 5~8 g/10min(230℃,2.16kg)
3. Moisture content: ≤1000 ppm

Applicable scope
1. Has the effect rapidly, and excellent slip properties.
2. High efficiency, join 2~4% of this product to the film surface or core layer, which will has good slip effect. The friction coefficient of plastic film will drop to below 0.25 in three days.
3. This product has good fluidity, good processability and rarely precipitates. The plastic films it produced is in excellent physical properties.
4. Suitable for biaxially oriented film, casting film, etc.

Packing and storage
25kg/bag (paper-plastic composite bag, inside PE film bag), store in a cool and dry place, valid for 12 months.