Auto automatic armature rotor aluminum die casting  mold machine


 


(1)    Main technical data of the armature rotor aluminum die-casting mahcine


Max. mold closing stroke:150mm


Pressing injection stroke: 50mm


Hydraulic system working pressure: 10~25MPa


Hydraulic motor power: 7.5kw


Oil tank capacity: 350L


Rotor stack length: 100mm


Rotor OD: 100mm


Pitch time 18~24s


Change-over time: 20mins


Upper Presser operation pressure: 40T


Bottom presser operation pressure: 15T


Working pressure of oil cylinder: 21Mpa


Power: 380V  50/60Hz  3.75KW


Machine weight: 2500kg


Machine Deminsion: 970mm(L)*920mm(W)*2300mm(H)


 


(2) Machine main function and characteristic of the armature rotor aluminum die-casting mahcine


Automatic get aluminiummelt liquid, automatic loading and unloading the rotor.


Rotor loading: automatic pneumatic circularly pick up.


Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.


Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.


Automatic feed mold releasing agent, the feeding time and times can be set.


There is water cooling channel, helpful for reducing the mold temperature effectively.


Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.


Machine will alarm and stop working if out of material.


Failure will be automatic displayed and machine will alarm.


One person can take care of more than one machine. and effectively save labor costs





http://www.nide-auto.com