Product Description
Hubei Xindongri Special Vehicle Co.,Ltd is specialized in fire trucks/fire engine/fire fighting truck in different types,such as water fire truck, foam fire truck, dry powder fire truck and rescue fire truck. Chassis we usually adopt is Dongfeng,Isuzu,Jmc,Sinotruk and so on. Tank capacity range from 1.5ton to 30ton. Customised model is also accepted. Any requirements, contact us. Efficient communication makes better understanding which leads to good business between you and us.
Fire truck is made up of two parts,chassis and superstructure.The superstructure is consisted of tank,pump room,storage compartment,power take off and transmission system,pipeline system and electrical system.This fire fighting truck can be widely used in department such as fire brigade of public security,petrochemical industry,factory,forest and seaport.Firefighter can fight with fire quickly,and save life and property in time. Any questions please let us know,we will reply you ASAP.
Dongfeng fire fighting truck (water type) Wheelbase:3300mm
Engine:117hp diesel
Capacity: 2-3ton water
Fire monitor:PS20
Fire pump:CB10/20
Liquid tanker
Volume: total 3000L (water)
Material: high quality carbon steel plate, anti-rust treatment inside.
Structure: welding, there is baffle plate inner
Fire fighting pump
and pipeline system
Model of fire fighting pump: CB10/20
Pressure: 1.0Mpa
Flux: 20L/s
Suction depth: 7m
Suction time: 35s
Installing type: central or rear
Pipeline system:
Suction pipeline: there is 125mm water inlet, can sop natural water source and sop
the water from liquid tanker
Water outlet pipeline: there is one middle pressure water outlet on every side, and
gun pipeling with dia.80mm on the top of tanker
Discharge remaining water system: to protect pump and all ball valves
Fire fighting nozzle
Model: PS20
Range: water 45m
Pressure: 1.0Mpa
Material of carriage
Carriage is made of high quality carbon steel and Aluminium embossed sheet
Pump room
Central type, there are pump system and pipeline, reasonable structure. Easily
operate all meters and operate-switch.
Equipment box
Equipment box: at the back of carriage, there is two-layers clapboard,
can store equipment. There is safe ladder to up and down on the
back of equipment box.
Structure: whole frame is welded to ensure intension and rigidity.
Material: frame is high quality steel, inner plague is aluminium embossed sheet,
surface is anodic processed.
Rolling shutter door
Light and high quality aluminum alloy rolling shutter door, neatly open and close,
good seal, low noise, beauty outside, and with one set lock
Pedal
Adopt air-supporting stucture to overturn easily and safely lock.
Material is high quality Q235A, pedal is non-skid aluminum embossed sheet
Electric control system
1. Alarm
Warning light: Lightweight Rectangular, installed on the top of cab, in accordance
with outside of whole truck.
Siren:80W. With FM/ Public Address System and megaphone
2.Light in equipment and pump room can be controlled in carriage.
3 3. Other light:one light on the top of vehicle, the switch in the cab.
color
Red
Technical requirement
1. The fire fighting vehicle is accordance with GB7965 performance requirementa
and test methods for fire fighting vehicle
2. Tank of foam and water is accordance with GB39.5 General specification for fire
fithting vehicle.
3. The outside is very beauty, the surface roughness is accordance with GB39.5
general specification for fire fighting vehicle.
All operating switch and meter is accordance with standard nameplate
http://www.xdrtruck.com