Metal stud and track making machinery
Product Description
metal stud and track making machinery
Q1. What will you do if the machine is broken?
A4:Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts freely,but you need pay the express cost yourself.If it is beyond the warranty period,we can negotiate to solve the problem,and we supply the technical support for the whole life of the equipment.
Q2. Can you be responsible for transport?
A5:Yes,please tell me the destination port or address.we have rich experience in transporting.
Product Description
Manual Un-coiler
Max Capacity: 5000kgs
Inner diameter of coil: 400-600mm
Manual with brake
Leveling Device
Ensure the material level and straight
The width can be adjusted
Auto Main Forming System
Max Feeding width:1220 mm
Product width: 1000 & 1020 mm
Thickness of sheet: 0.2-1.0mm
Motor Power: 5.5 kw forming system
Roller material: C45 steel
Diameter of shaft: Upper level 95 mm
Base Frame: 360 H steel welded..
Hydraulic Cutting Device
Cutting way: pause to cut.
Oil pump station 1set.
Hydraulic power: 4 kw hydraulic system.
Blade Material: CR12 with heat treatment HRC60-62.
Electrical System
Control system: HMI & PLC control panel.
Power: 440V 50Hz (as per local requirement)
Run-out Table
Frame: 8# steel groove welded
Roller type.
Quantity: 1 pc
metal stud and track roll forming machinery
Equipment operation
Automatically
Voltage
380V,50/60Hz or at buyer's request
Thickness of material sheet
0.3----1.5mm(normally)
Width of material sheet
As drawing
Control system
By PLC
Cutting method
Hydraulic cutting
Material of roller station
Gcr12 with hard treatment
Formed width
As drawing
Working speed
20m/min
Length of finished product
set in computer, machine will cut automatically
Transmission type
gears
A. Decoiler
B. Main forming machine
C. PLC Control box
D. Cutting parts
Company Information
Hebei Feixiang:
a. Two decades professional cold steel forming equipments manufacturer
b. One comapny with two factory,about 30000 square meter,more than 100 employees
c. National GB/T,CE,ISO9001:2008 Certificates
d. Built business relationship with customers from more than 65 countries and areas
Certificates
Our Services
Installation and training:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
Why choose FEIXIANG?
metal furring channel forming machine
*We supply all the technical support,such as engineers,drawings,and instruction manual.
*We send one or more than one engineers to client for installing and adjust all the machinery
*Supply formula guide service and staple raw material purchase.
*We could supply turnkey project to you.
*We have good reputation from our customers both at home and abroad.
http://www.steelrollformingmachines.com
Related Products of this Company