Zhongtuo automatic high speed interchangeable ceiling t grid roll forming machine could be used to make Main T and cross T.

Main T: equiped with inverter motor, producing in line speed: 30M per minute. Hydraulic automatic punching and cutting machine linked with main forming machine,punching and cutting automatically. Two heads and middle holes are punched and cut-off at the same time after forming.

Cross T: equiped with both inverter and servo motor producing in line speed: 30M per minute. Main machine with constant speed,it is traced by the servo trace system, automatic tracing the speed of the main machine, punching and cutting automatically. Two heads and middle hole are punched and cut-off at the same time after forming.

ceiling t grid roll forming machine is consisted of manual decoiler, feeding,main machine of roll forming, cutting and punching the head, electric motor,hydraulic station,Delta PLC control system, run out table

some profile drawings for your reference

some technical parameters of ceiling t grid roll forming machine

Decoiler

 

Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system

Loading capacity: 3T

Uncoiling width: 500mm

Inner diameter: 450-550mm

Main roll forming machine:

Feeding and flatting will make sure the steel is neat clean and straight.

Roller fixer : Guide column

Frame : middle plate welded Memorial arch frame type

Drive mode: gear

Diameter of shafts: φ40mm

Shearing machine:

Power supply : hydraulic power

Frame : Pillar style with rack & pinion system

Stroke switch : non-contact photoelectric switch

Electic Control System:

1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.

2.Other electric element are Delta

3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.

 

This kind of T grid roll forming machine is fully automatic. It can do punching and cutting automaticly. The final products can be

 

packed directly.

some details of ceiling t grid roll forming machine