Energy saving Built-in Microwave Sensor Switch
Product Description
Microwave Motion Sensor Automatic ON/OFF Switch Light Time and Range Adjustable
Description
The sensor is an active motion detector, it emits a high-frequency electro-magnetic wave 5.8GHz and receives its echo. The sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command. Movement detection is possible through doors, panels of glass or thin walls.
Note: the high-frequency output of this sensor is <1mW, approximately just 0.1% of the transmission power of a microwave oven.
It is perfect for use in corridors, stairwells and underground passageways where low light levels are maintained until motion is detected.
Technical Specification
Model: AM-RS-06
Input Voltage: 85V-265V AC / 50Hz
Output Voltage: 85-265V AC
Sensing principle: 5.8GHz microwave motion detector
Material: Flame-retardant ABS
Rated Load: 5-200W (Incandescent Lamp, Energy saving, Fluorescent Lamp)
Transmission power:<0.5 W
Operating Temperature: -20 ~ +65C
Detection area: 1~8m (radius), can be customized
Hold time: 3s~ 140s, can be customized
Daylight threhold: 3~100 lux, can be customized
Microwave Emission: < 10mW
Coverage: 180*360 (depends on fitting and surrounding)
Install: indoor, Ceiling mounting, wall installation
Installation height: Max. 5m
Dimension (L*W*H): 75*40*30mm
Warranty: 2 Years
Product show
iNSTALLATION & WIRING
Ensure that the electricity supply is switched off completely before installing or servicing this product.
The sensor works with a mains voltage of 85~265V 50/60Hz
The sensor has a 3-wire electrical input:
N ( neutral )
L ( Phase )
L' ( Switched phase/output)
http://www.sensorledlights.com
Related Products of this Company