Solar pump DC50K

Solar pump DC50K

Date:2015/06/01 Views:615

 

DC50K Series

Product Appearance

Specifications

NO.	Item	Specs
1	Dimension and weight	100.5mmx95.5mmx69.6mm;480g
2	External diameter of outlet	14mm
3	External diameter of inlet	14mm
4	Driving mechanism	Brush-less, magnetic isolated design
5	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6	Condition of use	Can continuously work, submersible or land use (not self-priming)
7	Suitable medium	Water, oil, or normal acid/ alkaline liquids (Pre-test needed for special liquid)
8	Max working temperature	60℃(for T sub-series) or 100℃(for S/A sub-series)
9	Power consumption	2.5W~48W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10	Rated voltage	12Vdc or 24Vdc
11	Working voltage range	5Vdc ~ 14Vdc or 5Vdc ~ 26Vdc
12	Max load current	2.0A (for T sub-series) or 4.5A(for S/A sub-series)
13	Max horizontal flow rate	18L/MIN(for T sub-series) or 23L/MIN(for S/A sub-series)
14	Max static lift	9M(for T sub-series) or 16M(for S/A sub-series)
15	Noise class	<40dB
16	Waterproof class	IP68(suitable for submersible installation)
17	Life span	>30,000hrsIP68(suitable for submersible installation)
18	Power supply	Suitable solar panel, batteries, adapter or other power source
19	Protection function	Dry-run protection, lock protection(customized function)
20	Power regulation function	Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
22	Feature	small size with high efficiency,maintenance-free Use ceramics shaft and carbon fiber sleeve Completely water proof (IP68) Brush-less dc control without pollution, long life span OEM and ODM service accept Offer Pump related control system design

Pump Structure

Electrical parameters (only for reference，parameters can be customized for specific requirements)

​

Model No.	Voltage	Max load current	Max static lift	Max flow rate	Power consumption
	V(dc)	A	M	L/H	w
DC50K-1260T	12	2.0	6.0	900	24
DC50K-1260S
DC50K-1260A
DC50K-12120S	12	4.5	12	1260	54
DC50K-12120A
DC50K-2490T	24	2.0	9.0	1080	48
DC50K-2490S
DC50K-2490A
DC50K-24160S	24	3.60	16	1380	86.4
DC50K-24160A
NOTE	Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids. When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current). The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head. The max flow rate means flow rate with no lifting height(according to the curve bellow)

 

Difference between 2phase & 3phase brushless DC pump

2phase  (T sub-series)

Hall sensor driving, circuit board should be placed inside pump body

3phase (S/A sub-series)

NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply  the same with common DC pump Intelligent program-driving, sensor-less, circuit outside of pump body (main factor that pump can be high-temperature resistant) Speed adjustable by PWM, 0~5V signal or potentiometer(optional) Lock protection,reverse-connected protection, over-vol.&over-current protection, Soft start, no current impact, can be contact directly with solar panel

                   
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.

Flow rate-Head Curve 

Dimensions of pump

​

production test

 

Exploded diagram of the product 

 Selection guide

 

Model Voltage (DC) Current range Max lift Max flow   Inlet Dimension Outlet Dimension Speed regulation function Dry-run / Lock protection DC30A 5~12V 0.1~0.35A 3m 4L/MIN 8mm 8mm customized Optional DC40 6~24V 0.15~1.2A 8m 11L/MIN 14mm 10mm PWM/0~5V/manual Optional DC40A 6~24V 0.15~1.2A 6m 14L/MIN 14mm 14mm PWM/0~5V/manual Optional DC40C 6~24V 0.15~1.2A 6m 15L/MIN 1/2’’thread 1/2"thread PWM/0~5V/manual Optional DC40D 6~24V 0.15~1.2A 8m 10L/H 10mm 10mm PWM/0~5V/manual Optional DC40F 6~24V 0.15~1.2A 6m 16L/MIN 1/2’’thread 1/2"thread PWM/0~5V/manual Optional DC40H 6~24V 0.15~1.2A 11m 7.5L/MIN 11mm 8mm PWM/0~5V/manual Optional DC50 6~24V 0.15~3.8A 7m 44L/MIN 22mm 22mm PWM/0~5V/manual Optional DC50A 6~24V 0.15~3.8A 5m 60L/MIN 27mm 27mm PWM/0~5V/manual Optional DC50B 6~24V 0.15~3.8A 13m 30L/MIN 22mm 22mm PWM/0~5V/manual Optional DC50C 6~24V 0.15~3.8A 6.5m 42L/MIN 1/2’’thread 1/2"thread PWM/0~5V/manual Optional DC50D 6~24V 0.15~3.8A 6.5m 42L/MIN 20mm 20mm PWM/0~5V/manual Optional DC50E 6~24V 0.15~3.8A 15m 25L/MIN 1/2’’thread 1/2"thread PWM/0~5V/manual Optional DC50F 6~24V 0.15~3.8A 15m 25L/MIN 1/2’’thread 1/2"thread PWM/0~5V/manual Optional DC50G 6~24V 0.15~3.8A 8m 40L/MIN 14mm 8mm PWM/0~5V/manual Optional DC50K 6~24V 0.15~3.8A 16m 23L/MIN 14mm 14mm PWM/0~5V/manual Optional DC50W 24V 1~3.8A wave 28000L/H Submersible 58mm Variable Frequency Optional DC50Q 24V 1~3.8A 5m 5000 L/H 1’’ thread 1"thread Variable Frequency Optional DC60Q 24v 1-5A 5m 10000L/H 1.2’’thread 1.2"thread Variable Frequency Optional Note: 1, lift and flow rate of product can be customized 2, dimension of inlet/outlet, speed adjusting method and control system can be customized. 3,Food grade and mute pump can be customized.       Installation