Q7 ultra deep pulse detection Metal detectors gold detectors

The basic characteristics of the product:

Maximal detection depth: 1 the actual depth of 4.5 meters depth of 50 meters

2 large detection range, search out a football field only 1-2 hours

3 detection, it is not affected by mineralization reaction and salty substances. Have minimized

4 it can identify different kinds of metals

5 one instrument is equipped with three different sizes of waterproof coil respectively, three each coil size is 1 * 1 m, 2 * 2 m 4 * 4 m

Q7 ultra deep pulse detection Metal detectors gold detectors

Technical parameters:

Technology: adopts the most advanced German lorentz pulseA metal detectorA7 chip, the core technology in domestic at present only in Dali company hands, have no a company.

Q7 ultra deep pulse detection Metal detectors gold detectors

Weight: 1100 g (batteries included)

Energy: 12 v / 3 ah

Operating time: the energy to work 10 hours

Charging time: quick charge 6 to 8 hours

 

 

Q7 ultra deep pulse detection Metal detectors gold detectors

The use of the host:

Electronic components in each host in the frame of quality stable mutual coordination, the surface of the host, there are two adjustment button.

Q7 ultra deep pulse detection Metal detectors gold detectors

(-) each knob function:

- VOL OFF ON key switch and volume, OFF position for shutdown, ON location for boot, turn right to increase the volume.

HOLD metal elimination - regulation of the smaller scale, ruled out the smaller metal, detecting the deeper, the greater the scale, out of the metal, the greater the detection depth is shallow, generation of machines have the knob, the second generation after machines without the knob, s est detection sort to minimum at ordinary times, if the surface of the small broken metal garbage there are most appropriate, raise the knob, but also reduces detection depth.

Screen light -- -- -- -- -- the screen light switch.

Q7 ultra deep pulse detection Metal detectors gold detectors

1, assemble the ground plate and on the ground (ground coil joint elbow and pipe hoop on both sides of the best electrical plastic tape coil and PVC tube fixed, such ground plate quite strong), shutdown state to disk cable connected to the host;

2, boot before you put all the knob to the minimum, twist VOL OFF ON knob clockwise to open again, according to the volume size need to continue to turn to maximum (generally), liquid crystal display light up at this time, after a few seconds the LCD panel will display the power supply voltage and signal strength indicator;

3, 2 key clockwise rotate slowly deepen, when transferred to a certain point, the machine will alarm sound, turning this knob to the opposite direction at this time, when the alarm sounds disappeared immediately stop rotating;

4, the machine has been adjusted to complete, pay attention to each step order cannot be reversed, the raise the level of ground plate of 30 cm off the ground to walk, can detect ground plate is apart from the ground level is not high or low, high and low amplitude of no more than 5 cm, otherwise the machine will alarm, when not detect ground plate to cut before the detection height should be tuned the SENS knob to the minimum, to put a plate drops or the machine will alarm, if still need detection with reference to article 2 new adjustment;

5, panel lights: click on the screen lights up, press the screen out again;

Q7 ultra deep pulse detection Metal detectors gold detectors

Conductance circle we stay not test for three months, to ensure that the machines work in long time is not a problem.In this respect our engineers pay too much effort and sweat, to allow more players with better equipment, our r&d broke through 1 million for the first time.This really hard-won success, also hope to players friends cherish their own equipment, make it play a greater value.

 

Machine is equipped with imported high-fidelity earphones are more likely to hear subtleties

 

In detecting, voice tone change, is the first signal symbol is the presence of metal.Before mining,

All these factors will be taken into consideration, depends on individual experience.

Detection, the stronger the tone, the greater the volume of an object.Sound changes and pointer offset is happening at the same time, which makes people better analysis and found objects.

In the strength of a sound and pointer offset can determine the size of the object.

In detecting, if the tone is very weak, can be ignored.Conduction properties of the metal are estimated, which requires if detect metal, tone will make high strength from it.As long as the location of the ground plate is just above on the buried treasure, conductivity coefficient can be stored and displayed in the header.

 

Error signal recognition:

In the process of detection, because of the filter and the diversity of the regulator, some interference to it, can affect the instrument for metal value judgment.

1. In magnetic oxide in the soil, its conductivity coefficient will be wrong.

2. A big piece of metal will be deeper exploration.

3. The customer to detect objects most to 4 m 7.

4. Because of the stronger signal, signal tower affect its within 50 meters.

5. Radio transmission also interferes with the instrument

6. Strong magnetic field, especially high dog days line may interfere with the instrument

7. If objects buried long time, its detection depth the general improvement of 80%.

The change of sound the first s ested that the presence of metal objects.

Alarm, the stronger the intensity of the sound, the burial objects, the greater the volume.

When charging, the charger on 220 v power supply, green indicator will light up, when powering up the host, the green indicator light will turn red, when host a full charge, the red light turn green again and not recharge the host or host charging completes the green indicator light will light up;

Maintenance: the host should be placed in ventilated good dry environment when not in use, the temperature between 10 to 35 degrees, humidity between 30-70, the host for a long time not to use charge once every 2 months.

Use key: when there is A suspicious when the alarm signal, should be from four directions to the target slowly close to, and just have A good four direction signal points, and connect the four points surrounding the suspicious area into A square box, if the four directions have signal, and form A box area to further determine the existence of suspicious, otherwise is false signal;As long as there is sound detection, she found the host B size, frequency, continuity, change, the region is likely to exist metal suspicious, needed to identify box method;C to determine the object size, can use steel sign the place in the center of the box to down, don't move, is probably the target depth;D some of blue bricks, lime soil and cement due to fire increases in the process of mineralization reaction, so the signalling and true metals geological phenomenon;E the signal strength value can represent the suspicious area on the screen size of the magnetic field, not as a basis for the presence of metal objects, as long as the measurable range, there is great metal area of the main engine sound size, frequency, continuity will be changed, and the region must have signal in four directions, as long as the host voice slightly change, must pay attention to this area are very suspicious may exist;F after not detect must put deepened sensitivity, deepen the 1, 2, knob to the minimum after 30 cm from the surface of the air, or machine will yell, can cause unnecessary and inefficient G in the air, the proper way to test the instrument detection depth first probe coil without metal should be flat on the ground, adjusted the host, with a metal from a height gradually reduce, carefully listen to host the change of the voice, a change with this height is the object of testing peak (affect the detection depth is metal surface area and their highly objects), the test is completed, if the test again, need to adjust to host again test, according to the procedure not test test results will not be accurate, such as the first time you measure the height of the cans is 1.8 meters, after you take cans, not host reset test again, test results will be less than 20% of the results for the first time, then will experiment with 20% of the proportion is reduced, so that the result of the test method is not accurate, before each test must be performed after the host to readjust and test results to accurately (this is automatic balancing machine function at work, if you don't have this function machine will yell everywhere);H every hours with a metal detection test the exploration ability of the host body to prevent equipment failure;K don't stay on the metal ground plate over 5 seconds, otherwise the machine will be the metal as 0 point not alarm signal, only the magnetic signals from greater than 0 point area host will call the police, or only than has been the host as zero signal metal objects larger machine will alarm when the metal body, to detect the target should be quick on, through to the metal free area pause after 1 minute, the machine will automatically return to this area again to zero (only when machine will free of metal area as 0, detection signal is the strongest metal area), different regional geological metal content, SENS, deepen the value 1, deepen 2 is different also, s est each detection more than 1 hour to rejig knob, to achieve the best detection depth;

   Add:Xinke Guoji Plaza,Yuhua District,Hebei province ,Shijiazhuang city , China

   Mobile:+86 137-2299-9955

   E-mail:dafanservice@gmail.com

   wechat:13722999955