INTRODUCTION
ADSL2+ Tester is an easy-to-use, hand-held advanced telecommunication tester that used for the installation, maintenance and measurement of ADSL2+ service. It supports the testing function such as parameter, error, DMM, PING that related to ADSL2+ service, user register authentication on the ADSL2+ user's line side. It also directly enables the engineers to verify, troubleshoot and evaluate the ADSL2+ service. It is the right tool for the job.

Main FeatureComply with multi-standards: ITU-T G.992.1 (G.DMT), ITU-T G.992.2 (G.Lite), ADSL2(G.992.3), ADSL2+(G.992.5)Automatically fit for the ADSL line standards,  real-time display  ADSL line connection status Support both WAN PING and LAN PING Support replacing MODEM and simulating the whole process of login on Internet High resolution backlight large LCD, Handheld design and easy-to-use Built-in Li rechargeable battery and smart charger circuit. High storages capacity, can store up to 70 groups of test results including settings and results information. Various Voice alarm and LED indications SpecificationBasic:Line standard,
Frame structure,
Line connection.
 Parameter:Fast Bit Rates (FAST): Upstream and Downstream;
Interleaved Bit Rate (INTL): Upstream and Downstream;
Max Bit Rate: Upstream and Downstream;
Utilize Rate: Upstream and Downstream;
Transmit Power: Upstream and Downstream;
Line Attenuation: Upstream and Downstream;
SNR Margin (Signal to Noise Ratio) : Upstream and Downstream;
 Link:(Near and Far)Loss of Power (LOP)
Loss of Signal (LOS)
Severe Error Frame (SEF)
Reed-Solomon Forward Error Corrections (FEC) INTL
Reed-Solomon Forward Error Corrections (FEC) FAST
Cyclic Redundancy Check (CRC) anomalies INTL
Cyclic Redundancy Check (CRC) anomalies FAST
No Cell Delineation (NCD) INTL
No Cell Delineation (NCD) FAST
Header Error Check (HEC) INTL
Header Error Check (HEC) FAST
Out of Cell Delineation (OCD) INTL
Out of Cell Delineation (OCD) FAST
Sever Error Second (SES)
Error Second (ES),
Bit Error (BE)