Dimensions(W× L× D): 1200/1500/1800X1000X2275mm

Advantage: European design with high cost performance.
                     Nice appearance with excellent process and finish. 
                     High quality Fume hood with European standards.
                     Different and paticular interior structure

Exterior material: 1.2mm cold rolled steel plate coated with AkzoNobel epoxy resin powder after welding, polishing, acid cleaning, phosphating etc. It includes 13 kinds of chemical treatment processes. 

Lining material and guidance flow panel: 5mm compact solid panel which is chemical resistant and temperature resistant. Corrosive material is used to connect inside lining panel and guidance flow panel. Fixed parts which can be dissembled are used to connect bottom of guidance flow panel and worktop. 

Between steel exterior structure and lining material, all-steel frame and fixed parts are applied. The fixed parts thickness is at least 2mm. Steel side panel can be dissembled, There are two pcs of maintainance side compact panel can be dissembled. The public device can be maintained between the steel exterior structure and lining panel. 

Movable door: The lifting and dropping are flexible which can stop at any position. Device is installed to limit the top position. With 6mm anti-explosion glass with film inside.Sliding door and hinge coaxial pulley wheel system is used to ensure the smooth and exact balance, this system can prevent the tilting of movable door and the lifetime can reach above 100,000 times. 

Light: Antisepsis day-light lamp fitted in gas insulated housing, not lower than 400lux.

Socket:  Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water proof cover.  

Worktop: 19mm epoxy resin worktop with 25mm water proof edge, 20mm ceramic worktop or lab grade phenolic resin worktop for your selection.

Lab accessories: 
1. Yellow brass, epoxy resin coated water control valve and cock.
2. Yellow brass, epoxy coated gas control valve and cock. The gas valve is with safety function to avoid air leakage, it will not be unintentionally turned on unless you press it.

Control panel:
LCD control panel which is capable of controlling ON/OFF of fume hood, lamp and fan.  Shutdown time can be set in advance. We can furnish control panel imported from France which can show face velocity,make alarm when meeting with unproper airflow etc.

Storage Cupboard:
1. 3 or 4 double walled doors made of 1.2 mm thick cold-rolled steel and spray painted as specified above.
2. Stainless steel handles and S.S exterior hinges.
3. PP United Cup, resistant to acids, alkali and organic impregnations.

Face velocity: It's 0.4-0.6m/s when we open the sash at 24''. (when the sash is fully opened).
 

Remark:
1. We can add polypropylene storage cabinet or PP pallet in the base cabinet to store strong chemicals. The base cabinet
is connected with exhaust system of fume hood which will exhaust waste air in it.
2. We can furnish duct and fan if it's required by customers.
3. We can furnish custom-built fume hood based on customer's requirement.