The 3D printing film is the exclusive membrane of 3D printer developed by our company. It can be used in the UV curing mode of SLA and DLP principle 3D printer ，Put the glue in the tray to act as a parting, replacing the silicone membrane.

Main features: 

High light transmittance, UV light throughrate reach 92%, shorter curing time, better curing effect, higher print accuracy.

More durable, release more than 30,000 times (refer to the printed page);

3D printer ，Put the glue in the tray to act as a parting, replacing the silicone membrane

Be suitable for  a variety of types of UV curing light 3D printers.

Size A:  peel off the protective film directly from the 3D menbrance, and then stick the base layer on the glue tank, Instead of using a silicone membrane, it is more convenient to use.

Size B don’t have back glue, so it need glue tank around a fixed at the bottom of the device.

Size: 210 * 290 mm

special size (more than 20) , please contact us.

Thickness: Size  A 0.125 mm; Size B 0.1 mm.

Note: Size A  has a positive and negative,The surface with no glue is protective film,stick the film with glue  on the glue tank; Size B does not have positive and negative, both sides can be used.