Water feed is [Set 21 and Ratio 115].

Ink feed is [Set 40 and Ratio 116].

Drying powder is level 4~6, depending on the artwork.

RPD and RBD's surface immediately dries after print. For rich mineral paper/ board (RPD & RBD) to fully dry and ready for further prints or processes please allow approximately 1 hour after light color prints or 6 hours after dark color prints. 

When stacking printed paper, please place separating plates as required.

To minimize static, please maintain at least 40% relative humidity. Anti-static equipment such as ionizing air units at the feeder and/or delivery is preferred but not essential.

Please trim 4 sides of the paper where higher printing and conversion precisions are required.