DEVELOPMENT HISTORY:

> 1984 established.

> 2002 be a joint-stock industrial enterprise.

> 2008 been top best factory in China crane filed.

> 2010 engage in exporting and servicing to the world.

> 2016, the new type double girder crane produce line finished 

ADVANTAGES:

> 68 million square meters.

> 2700 employees;  180 engineer;

> 2.3 billion RMB annual sales ;

> 1300 units of all kinds of processing equipment. 

> CE, BV, GOST.

Wall mounted jib crane is a new generation of the hoist equipment developed to meet the requirement 

of modernized production. It doesn’t require modification of the building structure in which it is being 

installed and it doesn’t take up much space, but it allows transporting goods on a three- dimensional 

plane.

This type of wall running  jib crane is mounted horizontally on the wall and instead of a vertical shaft has a RCC column bracket mounting. The hoist mechanism is similar to the floor mounted type, but without a vertical boom. The RCC column bracket allows a max rotation of 200 degree but covers the area near the bracket mounting without obstruction a floor level.

1.A new type material lifting device, designed based on mural jib crane.

2.Its rail is installed on concrete post in workshop, it can move on longitudinal direction, at the same time, the electric hoist can achieve the horizontal direction off the jib and vertical lifting direction.

3.This crane greatly expand and make full use of the work space, which is more convenient to use.

4.Used in workshop or storage, where is wide and high. If it is nesr to wall, it is applaied to work in high frequency.

5.The crane is usually used matching with bridge crane on ceiling. It is placed near to wall working in a cuboid space, mainly lift light objects.

Under the cantilever, it equipped with rack, hoist running dolly output gear and rack driven of 

occlusion, this could ensure the stability of the electric hoist.The hoist make shuttle running along the 

way of I-shaped beam, slewing of cantilever is finished by the motor to drive the reducer device.The 

cantilever is made of hollow steel structure, it is has a light weight, wide span, large lifting capacity, 

it is also more economic and durable.The jib crane which adopt special engineer plastic wheels with 

rotary bear could reduce the abrasion, running more smooth .It could install in any position with 

ranges of rotation 180°, 270°, 345°, 360°.

 > Loading capacity: 0.5~20ton ;

 > Lifting height:3~10m ;                               

 > Jib length:2~10m;

 > Slewing degree:0~360°;

 > Power supply:220~440V,50/60HZ,three phase or customized design.

Load capacity

(       )

Tips:0.5T,1T,2T,3T,5T,10T

Arm length

(       )

Tips:3m-7m

Lift height

(       )

 Distance from Hook center to ground

voltage

(       )

Tips: 380V 50Hz AC 3-phase or please note

Duty class

(       )

Tips:please note the average load

Hours per day

(       )

 operation frequency each hours, how many hours per day.

Control way

(       )

Tips: remote control, cabin control or pendent control

Lift speed

(       )

Tips:single speed or double speed 

Your nearest port

(       )