Ø   Main body

1)         Euro structure originated from Germany.

2)         Wall panels insulated with Rock-wool, with tongue and groove interlocking system, mounted at horizontal.

3)       Paint Drying Cabin For Aircraft.

Ø   Plenum & Filtration

1)         Pre-filter of fresh air: class G3 fiberglass.

2)         Ceiling filter: class EU5.

3)         Double filters of exhaust air: class G3 fiberglass.

4)         Air plenum built with our special design air deflector to allow more smooth and even distribution of air stream and avoid turbulence.

Ø   Lights

1)         Standard supply of paint booth ceiling lightings with 4×18 W LED lamps.

2)         Side lightings with 2×18 W LED lamps.

3)         36 W and 58 W lamps are as optional.

4)         Ceiling light box corner also with inclination angle to allow more light reflects.

Ø   Ventilation System

1)         Direct drive motors with suitable fans to ensure air capacity.

2)         SIEMENS, ABB or high quality Chinese brand motors are available.

3)         Designed noise is below 78 dBa.

Ø   Heating System

1)         Stainless steel 1Gr18Ni9Ti (SUS304).

2)         Diesel, LPG, NG, or other gas fuel as customer’s need.

3)         Hot water and direct fire heat are available for some special requirements.

4)         RIELLO or Weishaupt burners are used.

Ø   Control System

According EU using water-soluble paint require, increase controlling of leveling process and EU standard indication EN13355.