Hydraulic DTH Drill|Air Compression and Rock Drilling Integrated Drilling Rig

"Zhongtuo" brand ZT5-type open-air DTH drilling rig is an advanced drilling equipment that integrates the downhole drilling system and the screw air compression system. It has compact structure, good integrity and easy movement. The drill has energy-saving efficient, safe and environmentally friendly, flexible, easy to operate, stable performance and so on. Specific performance is as follows:

1, compact structure of the drill car, open-hole drilled hole drills and stroke pressure screw machine organic combination.

2, The rig equipped with single-stage stroke pressure screw host, flow (10m3 / min), pressure (1.5MPa), the use of stroke pressure pneumatic impact, high efficiency, low energy consumption.

3, the low center of gravity and balanced distribution of the drill, equipped with heavy "four rounds and a" 19 ° automatic leveling device and dual control system can be independently controlled to improve the stability of the machine to adapt to different conditions. The drill equipped with a two-speed travel motor + reducer structure, to achieve the perfect combination of speed and power.

4, large displacement hydraulic pump installed directly on the engine after the take-off port, simple structure to reduce the source of the fault.

5, large-scale luffing boom system to meet the needs of different working conditions in various conditions, in particular, can play low horizontal hole.

6, highly integrated hydraulic control system and layout of the centralized operating platform, a station can freely manipulate the entire machine.

7, the drilling rig configuration rotary speed control valve, according to different characteristics of the rock being drilled and different conditions, can be adjusted in time, drilling speed, high porosity.

8, the machine is equipped with real-time monitoring system and a stable self-protection system, can accurately reflect and control the working status of the drilling car, beyond the set range and failure can automatically shut down.

Efficient two-stage dry dust collection system, greatly improving the working environment, in line with the concept of energy saving and environmental protection.

ZT5 integral type latent open hole drill technical parameters

Rock drilling hardness	f=6-20
Drilling diameter  mm	80-105
Economic bore depth  m	25
Walking speed   Km/h	2.5/4.0
Gradeability	30°
Ground clearance mm	430
Total power kW	140
diesel engine	Yuchai  YC6A180Z-T21
Screw compressor displacement   m3/min	10
Screw air compressor exhaust pressure  bar	15
Overall dimensions       (L × W × H)mm	6500×2400×2600
Weight                     Kg	8000
Rotary rotational speed      r/min	0-120
Rotating torque              N*m	1400
The biggest push pull          N	25000
Lifting boom angle	upward54°    downward26°
The carriage pitch angle	147°
Carriage swing angle	Right47°  left47°
Lateral horizontal swing angle of the carriage	Right15°  left97°
Drill arm swing angle	Right53°  left15°
Frame leveling angle	upward10°   downward9°
Drive the length once           mm	3000
Compensation length            mm	900
Impactor	35A
Drill pipe	φ64×3000 mm
Dust capture methods	Dry (hydraulically driven cyclone laminar flow)

1 A six-cylinder diesel engine provides power for two systems, compact structure, good overall, easy to move.

2 Drilling rig equipped with the core knowledge of single-stage compression high-pressure screw head, the application of the world's leading Tom Y-shaped lines, large flow (13m³ / min), high pressure (1.7MPa).

3 provides high-pressure pneumatic impactor power, rock drilling speed than the stroke of the drilling rig 20% -50%.

You may also interested in below accessories for Down The Hydraulic DTH Drill

The Spare parts Kit for Hydraulic DTH Drill

DTH Drilling Rig Applicated in our client's project:

About Zhongtuo :

Shaanxi Zhongtuo Mining Equipment Company in Chinese focus on high-quality mechanical equipment and construction products for more than 20 years. We started from a small business, has become one of the leading manufacturer and supplier of Chinese construction equipment industry.. In 2015, Zhongtuo reported sales revenue of approximately RMB 50 million.

 

FAQ Collection:

Q1: Are you factory or trade company?

A1: We are factory. And we have ourselves trading company.

 

Q2: What the exactly address of your factory?

A2: No.27, Beichen Village Industrial Park,Chan Ba Industrial District, Shaanxi Province China

 

Q3: Warranty terms of your machine?

A3: One year warranty for the machine and technical support according to your needs.

 

Q4: Will you provide some spare parts of the machines?

A4: Yes, of course.

 

Q5: What about the voltage of products? Can they be customized?

A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equirement.

 

Q6: Which payment term can you accept?

A6: 30% T/T in advanced, 70% T/T against the B/L copy.

 

Q7: How long will you take to arrange production?

A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.

 

Q8: Can you accept OEM orders?

A8: Yes, with professional design team, OEM orders are highly welcome.

 

Q9: Which trade term can you accept?

A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

 

Related Products:

ultra-large rock splitters   air leg rock drill   Crawler Mounted Anchor Drilling Rig

Electric DTH Drill    pneumatic roof bolter    Hydraulic Stressing Jack