Small and Economical Lead-free Reflow Ovens

Product Description

 

 

 

 

Eight zones Economical JAGUAR A8 Reflow Soldering Machine 

Introduction:

No.1 The unique advanced long life heating system

1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. 

2.Using special high temperature resistant protection system in heating preservation system

3.Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat pipe, Model design, no noise, shockless and easy for maintenance .

4.Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB

 

No.2 Smooth and reliable transmission system

1.The transmission system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running smooth ,speed range can be arrived at 0-1000mm/min.

2. Independent wheel structure support and match stainless belt to make the running smoothly and the speed precision is up to ±20 mm/min .

3.Special stainless belt: durable and wear-resistant, not easy to deform and long life.

 

No.3 Stable and reliable electrical control system

1.It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.

2. Using thermocouple imported from Taiwan by each temperature zone.

3 .Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong      the lifetime effectively.

4. Power is abundant, heat up fast, it’s only need 20 minutes from room temperature to constant temperature.

5 .Failure diagnosis and sound light alarm.

6. Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.

 

Specification:

Model	JAGUAR A8
Heating System	Number of heating zones	UP 8/BOTTOM 8
	Length of heating zones	2800MM
	Heating mode	Up:hot air; bottom: IR
	Cooling Mode	Force air
Conveyor System	Max. Width of PCB	350mm
	Mesh belt width	400mm
	Transmission Direction	L→R(or R→L)
	Transmission Net Height	880±20mm
	Transmission type	Mesh
	Conveyor speed	0-1000mm/min
	Fixed rail side	Front rail fixed(option: rear rail fixed)
Control system	Power supply	5 line 3 phase 380V 50/60Hz
	Total power	26kw
	Starting power	22kw
	Normal power consumption	4KW
	Warming time	About 20 mins
	Temp. setting range	Room temperature-300℃
	Temp. control method	PID close loop control & SSR driving
	Temp. control precision	±1℃
	Temp. deviation on PCB	±2℃
	Data storage	Process Data and status storage(80GB)(machine with PC)
	Nozzle plate	Aluminum Alloy Plate
	Abnormal Alarm	Abnormal temp. (extra-high/extra-low temp.)
	Board dropped alarm	Tower light:Yellow-warming, Green-normal, Red-abnormal
General	Dimension(L*W*H)	4200×800×1320mm
	Weight	800KG
	Color	Computer gray

Packaging & Shipping

 vaccum packing + wood 

Our Services

 

Product during the warranty period, under normal storage, maintenance, use, if quality problems, responsible for the free repair or replacement, and provide the relevant maintenance knowledge; as a result of improper use or damage caused by the product does not work normally, the Company provides paid service. Product warranty period is not, it will provide a paid service.

Company Information

 

 

 Shenzhen Jaguar Automation Equipment Co., Ltd (referred to as "Jaguar") is a High-speed developing enterprise of High Precision Automatic lead-free Equipment such as reflow oven and wave soldering machine manufacturer, which specializes in lead free machine research and development.

As one of the well-known lead-free electronics equipment manufacturers in China, JAGUAR was founded in 2009 and

headquartered in Shenzhen.

 

Contact us

Shenzhen JAGUAR Automation Equipment Co.,Ltd.

Add: Building B,FuDa Industrial Zone,National Highway 107,Shajing Town,Bao'an District,Shenzhen

Mrs. Fan(elva):(86-13926197803)

Tel: 86-755-23316315

Fax: 86-755-29497125

Wechat:Chat15814498296