co2 clothing laser cutting machine price for Plastic

Specifications:

• Laser-type : Sealed CO2 laser tube, water-cooling, 10.6um

• Laser power: 80W(other wattages available)

• Machine Power: 220VAC

• Engraving area: 1200*900mm, 1300*900mm, 1400*900mm, 1400*1000mm, 1600*1000mm(other size available)

• Max engraving speed: 0-30,000mm/min

• Max cutting speed: 0-24,000mm/min

• Laser output control: 1-100% software setting

• Location precision: less than 0.01m

• Highest scanning precision: 50-1000DPI

• Operating temperature: 0 - 45C

• Operating humidity: 5- 95% non-condensing

• Minimum shaping character: English 1x1 mm

• Driving system: Micro-step motor and amplifiers

• Cooling mode: Freon-based chiller and water flow sensor

• Auxiliary equipment: Vacuum/Exhaust fan, air-exhaust hose, air-assist pump

• Work surface: Iron honeycomb

• Controlling software: Ruida

• Compatible software: TAJIMA, CorelDraw, AutoCAD, Photoshop, ...and more

• File formats supported: JPG, BMP, PLT, DST, DXF, AI...

• Color separation: Uses color property to set function, speed, and laser power. 

 

Standard Configuration: 

Laser Cutter/Engraver, Water cooling pump and tank, Air Pump, Exhaust blower, Software and Software User Manual, Machine operation Manual, Software User Manual, Trouble Shooting Manual, Communication cable, Power cable, Lenses and Laser tube (80 Watts), Machine operation Manual, USB Communication cable.

Detailed Images

 

Laser cutting head

The laser emission system consists mainly of semiconductor laser diodes and diffraction gratings.laser diode can emit wavelength and laser with the same phase.the wavelength about  0.65-0.78 μm.

Reci W2/W4/W6/W8 Laser tube

 

The standard laser tube is 80w. Precision supplies 80-180 laser tube for your choice, you can choose according to your work and the work piece thickness. 

 

Easy to Use LCD Control Panel

 

User Friendly LCD control panel allows the user to quickly change selected program and modify machine operational conditions. You can Start, Stop, Pause, Reset, Datum, Test Fire, Outline engrave project area, Move the X or Y axis, LCD Viewing Display, Z-Axis up/down, Control Interior light, Emergency Stop, Lockout the operations with the Key.

 

Fulong belt system

 The belt is Shanghai Fulong brand, it is durable and hard deformed.

 

ABBA square rail : 

sub-brand of SKF in Switzerland

The guide liner is Taiwan ABBA square rail, which is durable, after long time use, it will still have high precision.

Air Pump

The air pump is used for three basic reasons. The primary reason is the push fumes away from the laser's focal lens. This protects the lens from contaminants which could destroy the lens. The second function of the air pump is to push air into the material's kerf as created by the laser beam. Air that is applied to the kerf will remove debris/fumes and allow the laser light to penitrate deeper through the material. The third reason is that the air will help to cool the material. If the laser cut/engraved material stays hot, then it could warp or shrink. This air pump is a diaphram style which does not require oil. Oil or water in the air line could be projected directly onto the focal lens. This air pump has a higher air flow rate and is quieter than other piston-stroke designs.

Dedicated Micro Processor Controller for great performance

The heart of the laser machine is the industry leading Ruida controller. The Ruida motion controller is connected to the computer by USB connection. The computer downloads the project to the laser motion controller and it does all the work, leaving the computer and operator free to work on the next project. The dedicated Ruida controller has RAM onboard to store large projects without re-downloading from your computer.

Laser Head 

 

precision supply short and long laser head for your choice. short laser head usually for cutting, long laser head usually for engraving. 

Pass-Thru Doors.

The laser machine frame is built with doors that allow materials to extend out the front and/or rear of the machine. The pass-thru is helpful when engraving or cutting material that cannot fit completely inside the machine. Examples: Engraving pictures onto a bathroom shower door. Rolls of fabric threaded into the rear door, engraved or cut, and then pulled out the front door. Engraving the front door to my house. Engraving very large mirrors or sheets of glass. The limits are endless.

Blower / Fan / Vacuum.

The vacuum blower creates an air flow to remove dust and fumes from the work area of the laser machine. It is important to remove the dust and fumes from the laser engraving areas because dust can settle onto the mirrors or lens. Dust on the mirrors or lens will create a focal point of the laser's heat and soon destroy the optics. The fumes need to be removed from the operator work area because they can be irritating and unhealthy. The blower can also be connected to a vaccum box to pull air through the work material.

Blade table alternative Honeycomb table or Double table

External devices(water chiller,water pumps)

 

Up and down table

Multi-head.

The multi-heads can work together, so the machine will have higher effectiveness. 

Automatic up-down table.

It is automatically, using two motors to lift the table. It often match with a rotary axis, when engraving 3D l objects or the objects height beyond the laser machine working height, the automatic up-down is necessary. Alpha use high quality ball screw, the service time is much longer. 

Rotary Axis.

If you want to engrave bottle or other cylindrical objects, you should choose the rotary axis, it always together with the automatic up-down table.

sampleas

Our Company

   Jinan Precision Machinery is high-tech company which is specialized in Research and develop various cutting and engraving machinery. We learn from foreign advanced technology,adopt imported high quality spare parts to guarantee machine quality. 
   With Advanced manufacturing technology, large scale production, excellent machine quality, professional user guide training, perfect after-sale service, Our products are exported to more than 40 countries in Europe, Middle East, Africa, Asia, they are well welcomed and gained customer’s trust and satisfaction.
   We insist the professional quality, reliable service, and constantly innovation ,sincerely hope to develop with worldwide friends together, establish long-term win-win business relationship,to make a prosperous future!
   Our products have approved CE FDA ISO certificates.

Packing & Delivery

Packaging Details.

 

All laser engraving machine are packed with standard inner plastic wrap and outer playwood case,inner package would be help to tight all the small parts in the package.And the playwood is firm enough to protect the laser machine during shipping.

Our Service

1. * Inquiry and consulting support. 

2. * Sample testing support. 
3. * View our Factory.You will be able to get free training advice towards our machine in our factory. You will also get free s estion and consultation, technical support and service by email/fax/tel and lifetime technical support.
4. * I plant to high-quality, level price, short delivery time to win customers.Our delivery time about 4-5 days. 

5. * Normal machine is properly adjusted before dispatch. You will be able to use the mchines immediately.

6. * After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.

CONTACT