PU8630  nice price PU adhesive sealant for autoglass good quality 

PU8630 high adhesive selante adesivo de carro hot selling 

Key Features

1.  No black water flowing after applying sealant (using the low purity shampoo to assist the operation)
2. Low odor, environmental & health
3. Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resin, and coating material, etc.
4. One component adhesive with fabulous thixotropy, it’s convenient to apply with rapid curing speed
5. Excellent water, weather and aging resistance
6. Excellent wear-resisting property
7. Paintable and polishable
8. No sag or flow phenomena within 30mm perpends
9. Primerless

Technical Data Table

Directions for Use

Operation:Clean before operation

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

Direction of operation

Tool:Manual or pneumatic plunger caulking gun

For cartridge

1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

For sausage

1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength

Attention of operation

Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately.

1.Obtain a new windshield.
2.Remove the plastic surround side and top mouldings correctly.
3.Cut the urethane from the outside between the glass and the pinchweld. 
4.Apply a windshield primer to the frit band. 
5.Apply the urethane with an electric caulking gun.
6.Lift the windshield into place.
7.Push the window down around the frame to guarantee a tight bond.
8.Allow the urethane to dry.

Package & Storage