1.It is recommended to charge the device for at least 2 hours or until the red indicator light goes off and it is fully charged
2.Move the safety switch from the left (off) position to the right (on) position.
3.Press the center LED button to toggle the LED Light.
4.To activate the stun feature, hold down the LED button an push forward to expose the shock probes.
5.Device may take a second before delivering electric current. Once active, the stun feature will continue to fore automatically for up to 10 seconds or until de-activated manually by pressing the LED button again.

1.Input voltage:5VDC
2.Current capacity:≥1.8A
3.Output voltage:>100kv
4.Weight:52g
5.L89mm×W25mm×H17mm