1 Description

WSPS-2450-1000Wsolid state generator provides max power of 1KW with center frequency 2450MHz. It adopts LDMOS device, solid state transistor and integrated circuits and mainly complete with sine-wave generator, amplifier units, gain-adjustment unit, forward and reverse power detection circuits, various protective circuits, human-computer interaction unit, power supply and cooling system to provide perfect performance and functions including

● High stability, reliability and excellent performance

● Remote real-time monitoring system provide functions of data detection, monitoring and auto-diagnosis.

● Easily install and maintain.

● Various protection of over-current, over-temperature, short circuit, VSWR etc.

2 Technical parameters

Ø Frequency ：2450MHz；

Ø Output Power：≥1000W；

Ø Output Impedance：50Ω；

Ø Power consumption：≤2500W；

Ø Power stability：≤3%；

Ø AC input power：100~240 VAC, single phase；

Ø Output signal format：CW, Pulse of choice

 

3 Mechanical parameters

Ø Dimension：544.5mm×426mm×128mm；

Ø Weight：typically 10Kg；

Ø Connector：L29；

Ø Cooling system：water cooling.

 

4 Function introduction

4.1 Control

Ø 1~1000W power adjustment；

Ø Amplifier enable control；

Ø CW and pulse switchover ；

Ø 0~360 degree phase adjustment；

Ø 30%~70% pulse duty cycle adjustment

4.2  Protection

Ø Over-temperature：when above70℃；

Ø Over-current：when more than 19A（single circuit module）；

Ø Over -VSWR：Long time open circuit

 

5 Panel introduction

5.1 Front panel

 

5.2 Rear panel

 

Connectors and interface on rear panel

Ø DB9 interface（RS232/485）：RS485；

Ø Water outlet for cooling system-based generator；

Ø RF OUT：RF power output interface；

Ø 110Vac-240Vac 15A Max：power supply outlet，three-core outlet connect to regular110V-240V AC power supply；

Ø Power switch：AC switch，ON means power on，OFF indicate power off；

Ø Water inlet for water cooling-based generator.