The machine tool has the DF3A programming control software which has the independent intellectual property rights of the closed environmental protection cover, and supports 3 kinds of G code and 3B code, and the TXT file is read in.
X, Y-axis motor can be selected for stepping motor or ac servo motor, and servo motor can be used to improve the rigidity, torque and interpolation effect of machine tools.
The four-axis hybrid motor effectively improves the dynamic responsiveness of the large swing machine and ensures the precision of the large taper cutting.
Through the aging of the machine parts, the heat treatment and the effective and precise follow-up assembly, the machine tool has the good precision and the precision retention.
The electric control part has no power resistance and no transformer, so it is not hot. All the energy is used to cut and greatly delay the aging of the components, which is beneficial to long time cutting.
The characteristics of the high frequency power supply of narrow pulse and wide current, the characteristics of moving the wire motor and the fine machining and assembly of various parts of the machine ensure the surface quality of the cutting workpiece.
Used in high frequency power supply with constant current for cutting processing, effectively avoid the negative voltage and current, thus greatly reduced the loss of molybdenum wire, constant current source technology improved the utilization rate of power supply and reduce the power consumption.
The innovative peak current limit method and technology, even if the large current cutting, encountered the cutting short circuit, because the peak current is limited, also will not break the wire, thus greatly reduced the broken wire rate.