DC to DC power converters convert a source of direct current (DC) from one voltage to another. The 24V Power Converter was specifically designed for use with ResMed S9 Series PAP devices and the C-100 CPAPBattery Pack.
ResMed S9 Series PAP devices operate from a 24V direct current and the CPAP Battery Pack operates from a 12V direct current; therefore, the use of a power converter or sine wave power inverter is required.
The simple, single component connection of24V Power Converter provides a clean, efficient voltage conversion allowing you to power your ResMed S9 Series device with the C-100 CPAP Battery Pack.
Easily fits in the C-100 CPAP Battery Pack carrying case.
| Input |
12V / 24V |
| Output |
24V / 3.75A |
| Length |
4 ft (connector to connector) |
| Weight |
0.35 lbs |
The 24V Power Converter can only be used with ResMed S9 Series PAP devices. Older ResMed model devices will require the use of a power inverter or a proprietary ResMed DC converter.
RESMED DEVICE WARNING
If you are using any device manufactured by ResMed you must use either a power converter or power inverter to complete the connection between the device and the C100 Battery Pack as newer ResMed devices operate from a 24V direct current and the input plugs on older ResMed devices run opposite polarity from other manufacturer devices. Do not connect the Battery Pack directly to any ResMed model device as doing so will damage the device.
The 24V Power Converter is under warranty for manufacturing and quality defects for one (1) year.
