Condition:New

Place of Origin:Jiangsu, China (Mainland)

Brand Name:SHENCHONG

Model Number:WEK2-160T/4000mm

Machine Type:Press Brake

Raw Material:Sheet / Plate Rolling

Material / Metal Processed:Carbon Steel

Power:Hydraulic

Automation:Automatic

Extra Services:End Forming

Certification:CE

After-sales Service Provided:Engineers available to service machinery overseas

Model:WEK2-160T/4000mm

Usage:Metal Sheet Rolling Cutting Bending

Type:Tandem Press Brake

Nominal pressure:1600kN

Table length:8000mm

Throat:700mm

Warranty:1 Year

Material:Mild Steel

Application:Fabrication industry

Features of Tandem CNC  hydraulic press brake

• The tandem press brake are used to bend metal plate. With different dies, it could  make various work-pieces, which are widely used in air-plane, shipment, auto, engineering machinery, lamp pole, light pole, electric power pole, transformer and other relative lines.
  This tandem press brake is driven by hydraulic pressure and controlled by CNC.
• The press brake could attain quick down, slow-down of ram, pressure steady while working, quick returning and intermediate stop functions. Also, this press brake could be driven as inch, single & continuous ways.
• It could be operated either single or double ways.
• The frame is welded by steel plate of good rigidity and strength.
• The ram run smoothly. Re-position precision, anti-eccentric load, work-pieces made precision are high because the use of circulation around servo control against CNC + electrical-hydraulic proportion valves linear encoder.
• The press in air and the one of different angles are available. The crowning device which is built into the table and controlled by CNC attain the precise deflection compensation.

Standard configuration

• Shenchong WEK Tandem CNC hydraulic press brake sheet metal bending machine is able to have 16+2 Axis. Y control numerical axis of oil cylinder on both sides, X controls back gauge to move front and rear, V for oil cylinder compensation, Z refer to motorized side unloading device.

• The upper die is adjustable.

• The straightness of sheet metal can be adjusted by the upper die.

• The shim on the upper die can protect the upper die and reduce abrasion.

• Front feeding device is automatic which can improve the working efficiency. 

• Side unloading device is designed for large work piece.

• Automatic unloading device helps to improve the working efficiency.

• Anti-indentation device on the lower die.

• Small round roll on the lower is anti-indentation, which can reduce friction and protect the surface of the sheet