~PLUS 8000 is a very high quality, high solids emulsion that is resistant to both water and solvent based inks. PLUS 8000 will give a slightly higher print quality than PLUS 7000.

 
Features:

PLUS 8000 is designed to give the highest quality printing combined with the maximum durability.  PLUS 8000 has a solids content of 38% and is highly resistant to the most aggressive solvent, UV curing and water based inks. It has a  wide exposure latitude, is easily decoatable and uses direct addition diazo for maximum consistency of viscosity.
Benefits:

Reliability for long run printing with a wide range of solvent based, water based and co-solvent inks, the highest print quality from an emulsion.
General Information:

See section 'How to use PLUS emulsions' for detailed advice.
Applications:

Resistance to a wide range of water, solvent and co-solvent inks makes PLUS 8000 a suitable direct photostencil for most screen printing applications.

When processed correctly on high tension mesh PLUS 8000 gives a very hard stencil, which is particularly recommended for applications where the very highest print durability and print quality is required.

Please note for applications that require very high flexibility on a low tension/coarse mesh then it is recommended to use PLUS 2000 or PLUS TX (USA only).

Welcome Inquiry,any questions freely contact us.

In Addition

if you have any questions about this item or our service.

 Please kindly INQUIRY US by email or Phone.

  We must response to you within 24 HOURS !!!