Water Activated Fiberglass Pipe Repair Wrap Pipe Seal Bandage

Pipe repair bandage is an extremely convenient and effective product for the emergency repair of less severe pipe leaks on steel,HDPE, rubber hoses, ventilation ducts, plastic both underground and surface application. Quick and simple to use with no mixing or measuring required. A successful pipe repair can be achieved in only 30 minutes.

Water Activated Fiberglass Pipe Repair Wrap Pipe Seal Bandage

Water Activated Fiberglass Pipe Repair Wrap Pipe Seal Bandage

For Pipe Repair Bandage,normal size as below: ( The length can be produced as your need)

* Clean and roughen the damaged area with the metal file or wire brush, which will help resulting a more successful repair.

*Knead Steel Putty and apply firmly into damaged area. Putty has a 2-5 minute work time, and the bandage application must begin during this time.
* Put gloves on,Soak bandage in fresh water for 10 seconds. Squeeze bandage 1-2 times while in water to help activation.
* Squeeze out the access water, apply the bandage spirally around the damaged pipe area. Extending up to 50mm (2″)either side of the leaked area.
* With wet gloves, squeeze the bandage with a rotating motion until resin stops foaming and is set.

Bond in 30 minutes Pipe Repair Bandage
Tips: To achieve the best result,the bandage should be more than 10mm thick (10-15 layers). Allow 30 minutes for bandage to set rock-hard.

Water Activated Fiberglass Pipe Repair Wrap Pipe Seal Bandage

Contact: Mandy

mandy@unique-technology.com

Phone: +86 131 7522 3541

Tel: +86-574-85288851
Fax: +86-574-85567233

Address: 21F, Zimao District ,Ningbo China,PRC

https://www.unique-technology.com/

Water Activated Fiberglass Pipe Repair Wrap Pipe Seal Bandage