Basic technical parameters of the motor:

1.Reference voltage 380V, reference frequency 50Hz. The voltage and frequency of the reference point can also be determined according to the user's requirements.

2.The reference working system of the electric motor is a continuous working system S1, and it can also be adapted to other working conditions of S2 to S9.

3.Motor insulation class H

4.The motor's enclosure protection class is IP54, IP55 and IP56 can also be produced as required, and the cooling method is IC410 (closed surface cooling).

5.The speed range of the motor is wide, and it adopts V/f control. The frequency conversion range is 1～100Hz, among which 1～50Hz is the constant torque speed regulation, and 50～100Hz is the constant power speed regulation ( the output power is constant). With vector control, the variable range is wider and the low frequency performance is better.

6.The motor has a large overload capacity, and the overload capacity can reach 3.0 times the rated torque (2.0 times that of general motors).

7.The low-frequency starting torque is large, and the starting torque at a frequency of 1 Hz can reach 1.3 to 1.8 times the rated torque.

8.Good low speed performance. Smooth torque at low speed without creeping phenomenon.

9.Junction Box. Junction box standard position: The junction box of H100-225 frame is viewed from the transmission end. On the left side of the frame, the H250-355 frame junction box is located on the top of the non-drive end frame.