For M8~M16 screws and bolts, under head length less than 150mm
Available for 2~8 cameras

Feature
For M8~M16 screws and bolts, under head length less than 150mm
Available for 2~8 cameras
Flange nuts and rivets can be applied on this model
Optional: Laser detector to inspect thread presence
Optional: Rotating mechanism to inspect recess depth or broken pin
Optional: wheel crack checking system for head crack inspection
Optional: bottom sorting system for inspecting cutter presence
Optional: Bending checking module
Optional: 360° rotation module for thread damage inspection
Optional: two kinds of Eddy current systems:
1. For head open crack inspection
2. Material mix-up or with/without heat-treatment

Sorting Items

Screw-head height, width  Recess depth  Pinhole Excess Material
Ineffective thread length  Minor Thread Diameter  Feature Angle
Major Thread Diameter  Pitch Distance  Feature No.
Bevel Thread  Screw Length  Feature Similarity
Cone Point  Zinc:Yes or No（Head Top View）  Feature Length
Pinhole Alignment  Head Crack  AF/AC
Head Mark  Roundness  Material Mix-up
Inner Roundness  Inner Concentricity  Broken pin
Inner Excess Material  Shorten AF  Deformed Thread
Feature-Center Distance

Specifications

 Wire Diameter: φ8~16mm  Wire Diameter: φ8~16mm
 Length Under Head: 15~150mm  Sorting Precision: ±1 pixel
 Head Height: 2~25mm  Sorting Speed: 100~400/PPM