Product Introduction

Water-based fluorocarbon exterior latex paint is composed of high-quality water-based fluorocarbon copolymer and high-quality pigments and special additives.

Product Features

Excellent coloring and weatherability; good water resistance, alkali resistance; excellent adhesion; construction is simple, good scrub resistance; good anti-mildew algae performance.

Recommended Use

Mainly applicable to all kinds of ordinary residential quarters, bridges, factories and other building exterior decoration and protection; for a variety of concrete, cement, asbestos cement and masonry base.

Typical Application Of Coating

Substrate handling → One-component external walls Flexible putty → Alkali-resistant primer · Water-based fluorocarbon exterior latex paint

Construction Method

Spraying, brush, roller

Use Note

1. Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;

2. Wall to be painted water content should be ≤ 10%, PH <10 before painting, otherwise coating film will be easy to fall off, whitening or decolorization powder off phenomenon may happen;

3. Should be fully stirred before using, brushing at least twice, overcoating interval time not less than 4 hours (25 ℃), working humidity ≤ 85%, the working temperature not less than 5 ℃;

4. Should be fully stirred before using, according to the site temperature, humidity, to choose the ratio of thinning to suit the different requirements of the application methods;

5. Latex paint should avoid organic solvent contamination;

6. Pay attention to the necessary labor protection work during application.

7. Rainy or windy weather is not suitable for painting, wet walls should be dry before painting;

8. Application site should have a good ventilation, dust removal device to ensure the application quality;

9. The workers must wear the necessary labor protection articles.

Related cases

Dingzhou Mingyue Garden