Automatic plate-plate dividing plate, washing desulfurization, dehydration fan, electric heat drying, cold fan, plate turning, peeling machine, turning out board, selection of manganese, automatic closing plate, electric control system.
The cathode plate with electrolytic manganese is sent to the automatic plate-plate separator from the electrolytic tank, and the cathode plate is divided evenly and then into the flushing desulfurizer. After washing and desulfurizing the desulfurization machine, the fan is used to remove the surface of the cathode plate and then send it to the electric heating drying system for drying. After drying the cathode plate through after the cooling fan, again by the board to spin out the cathode plate into the machine to the cathode plate electrolytic manganese piece after stripping fully, the manganese turned out board machine out into the area by artificial remove individual had cathode plate clean. The detached cathode plate automatically enters the shelf to be reused. The whole production line adopts PLC linkage control.