Ti Frit Feature

1. Ti frit is made from ti powder particle

2. Ti frit is sintered in a high temperature vacuum furnace. So ti powder particle will not shed

3. Ti frit is surface filtration and depth filtration

4. Ti frit has narrow pore size distribution

5. Ti frit is a suitable for food industry and medicine industry (GMP) because ti is an in-noxious metal and an inert metal

6. High dirt holding capacity

7. Good porosity

8. High filter rating accuracy

9. The effect of filtration is good

10. High filter efficiency

11. Good permeability

12. Pressure loss is low in filtration process

13. High flow rate at low differential pressure

14. High compression strength

15. Good mechanical strength

16. Good abrasion resistance

17. Good durability against most liquids, gases and aggressive steam

18. High temperature resistance

19. High corrosion resistance

20. Backwash

21. Washable and Cleanable

22. Reusable

23. Long service life

24. Easy to be welded, fabricated

 

Ti Frit Technical Data

Raw Material: Ti

Filter Rating: 0.22-100 Microns

Operation Temperature: ≤ 300 ℃

Diameter: ≤ 400 mm

Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others

 

Application

Sensor, inductor, detector, survey meter, pressure release device, polymer extrusion device, polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry