Standard size: according to the requirements, the existing varieties are more frequent email or direct contact size.

Color: white, yellow.

Power number: 100w-1000w.

Thermocouple type: K, J.

Nickel-chromium aluminum resistance wire.

Heater standard voltage 220V/230V (other voltage values can be customized according to requirements)

Heater wavelength range: 2-10 microns.

According to different operating conditions, the average operation life is 3 years.

It is recommended that the radiation distance of the heater is 100mm to 200mm.

Provide 120mm ceramic bead wire.

Application of jiangsu tianbao ceramic heating plate.

1. The thickness of the installation plate of the radiator should not exceed 1.5mm.

2. The distance between radiator and radiator should not be less than 3mm due to thermal expansion.

3. For high power radiators (with a surface power density of 36kw/M2), the internal thermocouple control shall be adopted, and the surface temperature shall not exceed the allowable range temperature.

4. The thermocouple of the radiant heating plate has positive and negative points, and the red color is positive, and the extension wire must be used with a special thermocouple, which cannot be replaced by ordinary copper and aluminum wires.

5. In the following use infrared heater, may affect the service life of the radiator chemical pollution (chlorine, fluorine, caustic soda, hydrofluoric acid, nitrogen, peroxide) high mechanical strength pressure. The high temperature, voltage (surge)

The Edison thread radiator must be mounted on a ceramic or lined metal base.

7. The quartz radiator is recommended to be installed horizontally to ensure that the radiator is heated evenly and life.

8. In practice, please pay attention to compliance with relevant national security procedures, such as IEC or EN standard 60159-1.

E-mail: 15365785712 @163.com

Tel: 15365785712 (WeChat)