Advantages:

♦ Specified screw designed for profile gets better plasticizing effect and achieves stable extrusion procedure;

♦ Speedy cooling forming die supports the production line with faster linear speed and higher efficiency;

♦ Upper and lower caterpillar is driven by the separate motor, which ensures the stability and reliability of the haul off 

  unit hauling; With calibration table is fore-back, left-right, up-down adjustable, simplified operation;

♦ Saw cutting unit, speedy and stable cutting, with the smooth incision; as to wide width profile, designed tracking cutter

  ensures the speedy and stable cutting;

♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently.

Application:

a.Particular designed conical twin screw for PVC powder raw materials

b.Adapted to different moulds for different PVC profiles

c.with special designed vaccum calibration platform,haul-of and cutter,stacker.

d.Adopt with full aspects efficient water mist cooling on profile.

MACHINERUNNING TEST AND AFTER SERVICEWhen machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.

When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.

If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 

Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable