New Content Black PP Master Batch For Plastic Pipe
Technical parameter:
| ITEMS |
Nominal Value Unit |
| Specific Gravity |
0.95~1.14 |
| Melt Mass-Flow Rate(MFR)(190ºC/10.0kg) |
<15 g/10min |
| Carbon Black Content |
40 % |
| Moisture Content |
<0.15 % |
| PE Carrier |
52% |
| PE wax |
8% |
| Production Temperature |
150-180ºC |
| Mobility Resistance |
5 |
| Light Fastness |
Grade 4-8 |
| Migration Resistance |
≥4 |
| Heat Resistance |
≥4 |
| Add Ratio |
2%-10% |
Package: 25kgs Kraft Bags
Technical Specification: SGS Certificate
Applications of black masterbatch:
1. PE/PP Injection Molding (Box, Containers, Chairs, Crates, Buckets, Battery, cases, Hangers, etc.)
2. PE/PP Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
3. PE Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. PE Film (shopping bags, casting film, multilayer film, etc.)
5. PE Fiber (Carpet, Textiles, Upholstery, etc.)
FAQ:
Q1. How to use masterbatch?
A:just mix up with the resin granules according to the dosage ratio under appropriate temperate.
Q2. How long the masterbatch could be stored?
A : If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state.
Q3. Does the masterbatch need to be dried before use?
A : In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
Q3. Does the masterbatches influence the property of products?
A : Some pigments have effect on flame resistance. It should be mentioned as first if is used for flame resistance products.
Q4. Does the mould have an effect on masterbatches?
A : If ask for a smooth surface, Good quality mould is needed.
